What went wrong with your FX today?

my fx always pulls to the left. i did a alignment check and it was fine. didnt fix it. happens with my summer and winter tires so it aint the tires. any idea?
 
Does anyone have any suggestions to where I can buy the front rail end cap (passenger side) from?

pbZFINH.jpg

It's for the front passenger side. Apparently flew off this morning while driving :(

Also, Does anyone know what this issue might be (sorry for crappy pics):

371wT9D.jpg

RHbmck8.jpg

1qnr63V.jpg

This is the exact location, its on both rear doors:

iS4KDZ1.jpg
 
Here is the part # for the passenger (right) front cap.
http://www.nissanpartszone.com/parts/nissan-end-cap-front-r~73830-cg000.html

---------- Post added at 10:49 AM ---------- Previous post was at 10:44 AM ----------


Hmm, that is unusually cheap for the cap from that site. Its about $100 that I have found. I would verify the part first.
 

Thanks! I was actually looking in the wrong section, lol. I think its item 11 though?


Thanks for the part number. Looking at the link that Zebra posted, there are 4 different 'item 11' in the list, the only difference I can see between them is that two are polished, and two are black. I'm guessing I need the black one since my rails are black? which one should I be ordering between those two? One is $90 while the other is $63.
 
Last edited:
Also the rippling on the black trim is a pretty standard thing. I know that I have it on one side, but not the other. Not really sure what causes it.
 
I discovered the FX I just bought is.... Awesome!

thats not really something that went wrong.... Ok. The door locks are failing.
 
Dryer fan at the touchless car wash blew off my LED Mirror cover. I guess it's a sign that I'm dropping the ball on the Volvo upgrade.
 
My Telescoping Steering adjustment stopped working. It tilts up and down but not back and forth, just a grinding noise! I've understood this is some what common and I'm still looking for a fix without having to replace the whole column!
 
Last edited:
My Telescoping Steering adjustment stopped working. It tilts up and down but not back and forth, just a grinding noise! I've understood this is some what common and I'm still looking for a fix without having to replace the whole column!
sounds like the motor is out
 
My Telescoping Steering adjustment stopped working. It tilts up and down but not back and forth, just a grinding noise! I've understood this is some what common and I'm still looking for a fix without having to replace the whole column!

Telescoping motor part# 48991-CG200. You may want to check the gear on the telescopic track before committing to purchase a new motor.
 
Back
Top