- Car
- 2012 Nissan Maxima SV
- Name
- Joey
Wondering if anyone here knows, I have a 2012 nissan maxima sv with 47k on it would it still have a dealership warranty cuz it's only 4 years old?
Sent from my SM-N920V
Sent from my SM-N920V
The Random Question Thread
- Thread starter tchuck
- Start date
- Car
- 2011 FX35 AWD
It depends on the in service date. Warranty should be 4 years/60K You can call any Infiniti or Nissan dealership and give them the VIN and they will give you the in service date. As long as it's after today's date in 2012, you should be covered.
- Car
- 2007 FX35 RWD
I believe so. They should be able to test for water, as well as glycol, or whatever anti freeze is.
- Car
- 2012 Nissan Maxima SV
- Name
- Joey
Thanks ocal21 and Eothain I will most definitely call them tomorrow and find out.
Sent from my SM-N920V
Sent from my SM-N920V
- Car
- 2007 FX35 AWD
Sorry to bring this back Andy. So I purchased the half assembly CV axle driver's side from Rock Auto. The Sales Rep recommend for me to purchase the SUNTRACK because he said the A1 Cardone is remanufactured as indicated on the "reman" notation. It arrived today but the problem the OEM bolt does not seat flush on the mounting recess as the "bolt collar" comes in contact with the side of the shaft. Which brand did you purchase? Even if I would pick up a longer bolt, it would still not sit flush because of the design of the aftermarket CV Axle.
How did you make it work in yours?
Thanks
- Car
- 2017 QX70S
- Name
- Andy
Nothing to be sorry about Ruben. Does the Surtrak look much difference than the oem one? Mine is the A1 Cardone Re-manufactured one. No tricks to install mine. Shadow191 ran into some issues installing his. He has an 07, but I don't think is about the bolt not being flush though.
Attachments
I had issues removing my OEM ones due to the depth of the housing. The aftermarket one I bought actually was much easier to install since the housing was shallower and I was able to get a socket on it. Do you have a pic of yours? Is there a scallop next to each set of bolt holes for clearance? Trying to picture why the bolt collar doesn't clear.
- Car
- 2006 FX35 RWD
- Name
- Nnaji
How on Earth do you guys get an accurate reading on the transmission fluid dipstick?
When the engine is warm and running and in P, I wipe then check.
Once I pull it out, there's a thick fluid goob on the bottom below the low level.. and the rest of the dipstick has fluid on it..
...So idk if it's over or under??
When the engine is warm and running and in P, I wipe then check.
Once I pull it out, there's a thick fluid goob on the bottom below the low level.. and the rest of the dipstick has fluid on it..
...So idk if it's over or under??
- Car
- 2003 FX45
Looking at starters on rockauto...
PURE ENERGY (remanufactured) $37 + $40core = $77
REMY (remanufactured) $105 + $70core = $175
DENSO (remanufactured) $141 + $34core = $175
AC DELCO (remanufactured) $184 + $49core = $233
I feel skeptical about the low price on the Pure Energy. Anybody have any experiences?
I'm thinking it might be worth the risk just to found out.
PURE ENERGY (remanufactured) $37 + $40core = $77
REMY (remanufactured) $105 + $70core = $175
DENSO (remanufactured) $141 + $34core = $175
AC DELCO (remanufactured) $184 + $49core = $233
I feel skeptical about the low price on the Pure Energy. Anybody have any experiences?
I'm thinking it might be worth the risk just to found out.
- Car
- 2017 QX70S
- Name
- Andy
There should not be a "thick fluid goob" on the stick. It should look just like the oil dipstick. Perhaps, clean the "thick fluid goob" off the stick and pull it out to check again in a a day or two?
---------- Post added at 08:55 AM ---------- Previous post was at 08:51 AM ----------
Holly... $37 for a reman starter is a scary low. I personally won't even bother with it since is somewhat a pain to replace the starter.
- Car
- 2003 FX45
Thanks Andy. It's so cheaply priced, plain curiosity is getting the best of me.
I'm thinking I'll get it and keep my core to have that rebuilt. I don't know.
I'm thinking I'll get it and keep my core to have that rebuilt. I don't know.
GFortFX
Member
- Car
- 2009 FX35 AWD
- Name
- Greg
hi everyone, question about mirrors/covers.. Bought my FX a few months ago with a damaged mirror, and have been afraid to touch it til it warms up outside (afraid it'll crack in the cold - i know how expensive these are with the cameras..)
Has anyone removed their mirror covers and know where the clips are? Should I even bother with removing it or just use something like a credit card to slide into the gap and work it back into place?
Appreciate any suggestions!
---------- Post added at 02:19 PM ---------- Previous post was at 02:19 PM ----------
holy shit that picture came out huge, my bad
Has anyone removed their mirror covers and know where the clips are? Should I even bother with removing it or just use something like a credit card to slide into the gap and work it back into place?
Appreciate any suggestions!
---------- Post added at 02:19 PM ---------- Previous post was at 02:19 PM ----------
holy shit that picture came out huge, my bad
Attachments
BYGDAWG3758
Member
- Car
- 2005 Infiniti FX45
- Name
- HENRY
What is the difference between "shortest time and shortest distance" on the OEM navigation unit?
I'm thinking one avoids highways, I guess....
I'm thinking one avoids highways, I guess....
- Car
- 2006 FX35 RWD
- Name
- Nnaji
Quickest route (via traffic) vs Shortest route
- Car
- 2017 QX70S
- Name
- Andy
hi everyone, question about mirrors/covers.. Bought my FX a few months ago with a damaged mirror, and have been afraid to touch it til it warms up outside (afraid it'll crack in the cold - i know how expensive these are with the cameras..)
Has anyone removed their mirror covers and know where the clips are? Should I even bother with removing it or just use something like a credit card to slide into the gap and work it back into place?
Appreciate any suggestions!
---------- Post added at 02:19 PM ---------- Previous post was at 02:19 PM ----------
holy shit that picture came out huge, my bad
If you look at the 5th picture on this ebay listing, you'll get the idea how to remove the cover. In your case, removing the cover will probably easier to refinish the black scraped up mirror part.
http://www.ebay.com/itm/LED-Signal-...ash=item23570fb7be:g:084AAOSwMmBV0x9~&vxp=mtr
