Fire0nic3FX
Member
Fuel Gauge Reads "Empty" After Filling Tank
ITB12075:
IF YOU CONFIRM: An applied vehicle has a fuel gauge that registers "empty" after the fuel tank has been filled up full. ACTION: 1. Remove the main fuel level sensor unit, fuel filter, and fuel pump assembly (fuel pump module). 2. Remove the spring from the fuel pump module just removed. 3. Install the spring onto the new fuel pump module. -- With the spring installed, the new fuel pump module will have two (2) springs. 4. Install the new fuel pump module into the vehicle. --For repairs, refer to SERVICE PROCEDURE. See this bulletin for further detail.
ITB12075:
IF YOU CONFIRM: An applied vehicle has a fuel gauge that registers "empty" after the fuel tank has been filled up full. ACTION: 1. Remove the main fuel level sensor unit, fuel filter, and fuel pump assembly (fuel pump module). 2. Remove the spring from the fuel pump module just removed. 3. Install the spring onto the new fuel pump module. -- With the spring installed, the new fuel pump module will have two (2) springs. 4. Install the new fuel pump module into the vehicle. --For repairs, refer to SERVICE PROCEDURE. See this bulletin for further detail.
Last edited: