Yessir you already know haha...
if you still have my number text me I dont have your anymore
BIG "A" DETAILING Shop Introduction & Pricing
- Thread starter AndrewBigA
- Start date
- Status
Yessir you already know haha...
if you still have my number text me I dont have your anymore
AndrewBigA
Member
i have your # somewhere, id have to dig for it though. jsut call me at the shop.
(718) 445 9995
AndrewBigA
Member
thanks baker =)
yes im going to post all my threads up on here. time to whore it up =P
AndrewBigA
Member
$350-$450
haha have fun, until one of the mods asks you to put it all in one big thread titled "Big A's details"
so if you were to do something like this for me...like I guess the "paint-correction" maybe, to get out those swirls etc. etc. would it be around that? I also need my wheels polished...
AndrewBigA
Member
well see what happens
AndrewBigA
Member
well my paint correction prices are $250 $350 $450 all depends on the condition of the paint. this black G35 was pretty bad. i cant give you a final price untill i see your truck again. ill give you a good, fair price dont worry. ill polish the wheels for free.
if you want to update & add cars that you detail that's fine, but keep a big A's detailing thread, not a whole big A's detailing forum man 
threads merged.
if you want to post up a DIY or anything like that, or any other subject then that would be another thread of course...
threads merged.if you want to post up a DIY or anything like that, or any other subject then that would be another thread of course...
^ told you A haha.....
John, can't wait for the caps
John, can't wait for the caps
AndrewBigA
Member
lol, its ok
no problem man, ill keep everything in this thread.if you want to update & add cars that you detail that's fine, but keep a big A's detailing thread, not a whole big A's detailing forum man
if you want to post up a DIY or anything like that, or any other subject then that would be another thread of course...
i got a lil excited for a hot minute lol
---------- Post added at 01:17 PM ---------- Previous post was at 05:25 AM ----------
started the shop ceiling insulation project a few days ago.
we should be done by the end next week.
went with the good stuff, R-19 wrapped completely around in plastic film.
were done putting up the insulation in half of the shop.
after thats done, 1/2" thick foil wrapped foam panels will be installed.
crown molding will be installed where the top of the wall meets the ceiling,
then painted purple.
don't forget there will be unlimited free cups of hot chocolate
for anyone thats here, all winter long. all you have to ask for it & youll get you some =)
to make an appointment send me a PM or call the shop (718) 445 9995
Attachments
IvoRoyfx35
Member
This looks like something I'd see/post in Autopia.
When I first saw your prices at like $95 for 2 step polish, I was like no way, as I do detailing here in socal also. I spend about 8 hours on a 2 step polish and there's no way I can charge that little.
But then reading further, I saw the 250/350/450 and the work described, and knew that this was more like the detailing jobs that I do. Prices seem very fair.
Anyway, enjoyed looking through your work and keep up the good work. Look forward to having some detailing discussions with you in the future.
When I first saw your prices at like $95 for 2 step polish, I was like no way, as I do detailing here in socal also. I spend about 8 hours on a 2 step polish and there's no way I can charge that little.
But then reading further, I saw the 250/350/450 and the work described, and knew that this was more like the detailing jobs that I do. Prices seem very fair.
Anyway, enjoyed looking through your work and keep up the good work. Look forward to having some detailing discussions with you in the future.
Last edited:
AndrewBigA
Member
thanks but can you do me a favor & remove your website link from your post please.This looks like something I'd see/post in Autopia.
When I first saw your prices at like $95 for 2 step polish, I was like no way, as I do detailing here in socal also. I spend about 8 hours on a 2 step polish and there's no way I can charge that little.
But then reading further, I saw the 250/350/450 and the work described, and knew that this was more like the detailing jobs that I do. Prices seem very fair.
Anyway, enjoyed looking through your work and keep up the good work. Look forward to having some detailing discussions with you in the future.
See ya bro!
you should just start your own detailing thread instead. best of luck on the west coast! we can discuss whatever you want, call me whenever you want just remember were in different time zones lol.
-andrew
ps i havent needed a website but should have mine finished over the winter.
---------- Post added at 01:54 PM ---------- Previous post was at 01:44 PM ----------
thursday 11-19-09 & friday 11-20-09 only
hand wax sale
og price $45 sale price $39 (save $6)
hand wash, clay, wax applied by hand
vac, dash & center console wipe & blow out
waxes available for the sale price:
collinite #845 liquid insulator wax
collinite #915 marque d' elegance limited production automobile wax (paste)
collinite #885 special heavy duty fleet wax for marine & aeronautical finishes (paste)
for an additional $16 you can have a layer of 1z einszette glanz
applied as a bottom coat to seal the clear coat.
the wax you decide to have applied will be layered as the top coat.
seal & wax og price $75 sale price $55 (save $20)
pm or call to set up an appointment
Last edited:
IvoRoyfx35
Member
My apologies. done.
AndrewBigA
Member
thanks, wheres your detailing thread? post it up already, your slacking lol.
AndrewBigA
Member
AndrewBigA
Member
just a little preview of one of the project im in the middle of working on. shots are taken from the passenger door. the entire car, every single panel has really bad paint damage from automatic car wash abuse & the previous owner mustve hired a butcher to buff the car out. i saw the car under the lights about a month ago @ the GPNY meet. I know the car was bad but big jobs never intimidate me, i was up for the challenge as always.
list of paint problems:
hollograms/extremely deep "buffer trails"
the cause: inexperienced butcher detailer with improper use of a rotary machine. wheel speed was probably around 1700-2000 rpms, may be even 2200. the pad obviously was not kept moist. this is what happens when you run the machine on too high of a speed with a dry pad. im surprised there were not any burn marks in the paint.
heavy & deep swirl marks
the cause: previous butcher detailer
dull/flat reflection
the cause: all these dam paint defects & buffer trails giving off a horrible reflection, making the car not shine to its maximum potential
i am really excited about working on this car. i know the customer will be more than happy. everyone at the local meets has been on his case & telling him to go to me. this car will deffinitly turn heads the next time you see it!
50/50
right side after wash & clay
left side after compound, polish, wax
i wanted to cry after inspecting the paint under the halogen lights
i can not wait to finish this car & see every panel looking like this!
list of paint problems:
hollograms/extremely deep "buffer trails"
the cause: inexperienced butcher detailer with improper use of a rotary machine. wheel speed was probably around 1700-2000 rpms, may be even 2200. the pad obviously was not kept moist. this is what happens when you run the machine on too high of a speed with a dry pad. im surprised there were not any burn marks in the paint.
heavy & deep swirl marks
the cause: previous butcher detailer
dull/flat reflection
the cause: all these dam paint defects & buffer trails giving off a horrible reflection, making the car not shine to its maximum potential
i am really excited about working on this car. i know the customer will be more than happy. everyone at the local meets has been on his case & telling him to go to me. this car will deffinitly turn heads the next time you see it!
50/50
right side after wash & clay
left side after compound, polish, wax
i wanted to cry after inspecting the paint under the halogen lights
i can not wait to finish this car & see every panel looking like this!
Attachments
- Status