What did you do to your FX / QX70 today?

[la_fx35]

Here is couple pics of my VLEDS V3 Triton 6000K Switchback bulb.

 

[StuLax18]

Are they on as a white light normally, until turn signal is activated, or does it flash between amber and white?

 

[la_fx35]

Normally its white. Amber only in signal mode. I made a video of it in action, but need to editing. The video file is too large.

 

[StuLax18]

Watched a few videos online. They seem pretty cool, although I wish they switched a little quicker. Reminded me of the Audi LED's that turn off when the turn signal comes on. Kind of pricey too. Do you need to install all those adapters and wires and stuff that I saw in the photo on their site?

 

[Ed@TunerStore]

Looks nice Andy:good:

 

[la_fx35]

Thanks Zee. Yeah, I wish it can switch a little quicker too. Yep, just like the Audi...LED off, turn signal on... and vice versa. I'm putting a DIY together. I does need the socket adapter and some hard wiring.

 

[smijus]

Nice, I like the look with all that 6k up front.

 

[la_fx35]

Thanks Justin. You know how good those VLEDS looks

 

[GetLuckiFX]

Finally took time to finish the interior and got rid off the rest of the silver CF on the lower center console. It's all black. Looks so much cleaner and unified that way. Also added amber foot well accent light.
And started working on the inner tail lights. One down, one stalled due to a faulty LEDs:-/.

 

[la_fx35]

Interesting. Can't wait for to see what you got going with the inner tail lights. I have to agree that blacken those aluminum pieces give the best looking interior, but I do see why the silver in the beginning. Didn't get to re-install mine after the whole interior swap until recently. Love the foot well lighting. Got mine back in recently.

 

[meme405]

Finally took time to finish the interior and got rid off the rest of the silver CF on the lower center console. It's all black. Looks so much cleaner and unified that way. Also added amber foot well accent light.
And started working on the inner tail lights. One down, one stalled due to a faulty LEDs:-/.

The lighting mods on your car are awesome. Looking forward to what you do with the with the rears.

On the note of lighting, I want to finally do my HID Reverse lights. Only thing I want to do different from just installing them, is to use the wires from my removed rear wiper to be able to trigger them manually. It has been awhile since I removed my rear wiper, so I do not exactly remember how the wiring was, is this something that would be pretty easy?

 

[GetLuckiFX]

Ahhh thanks trying my best.
Here is a little sneak peak, see if you notice the add-on .

As to rear wiper, it's really easy. Once you get the cover off and see all the wires it will make sense.

 

[J3FF3R$0N]

^ Interested to see where this is going

 

[StuLax18]

Changed the BC's in the front from 6 from hard to 18. Ride became noodley, seemed less responsive, but maybe a bit smoother. Bottomed out in one spot totally not expecting to. Seriously thinking about getting stiffer springs in the front now.

 

[sukhi105]

Reverse angel eye? Lol looks cool

Sent from my SAMSUNG-SGH-I337

 

[HanJo Lee]

Pics Update

So recently I got a lot of things done to my FX.

- Invidia Test Pipes (Had two extra resonators installed previously on Invidia Gemini Cat-Back so it is nicely toned)
- Uprev Tuned (Absolutely love it)
- Grounding Wires (Big difference in reponsiveness and the car feels like new with the tune)
- Brake/Steering Fluids to all synthetic (Now I am running with all synthetic fluids. Motor Oil, Transmission, Transfer Case, etc)
- R1 Concepts Premium Drilled/Slotted Rotors w/ Stoptech Brake Pads (Had Rotorpros rotors for 4 years and this one is even better in both quality and performance)
- H&R Lowering Springs w/ new KYB Shocks & Struts (Had stock Shocks & Struts for 8 yrs (68,000 miles) and they were almost done. Figured why not order some springs with it. Can't wait until it gets settled down)
- 22mm Ichiva V2 Wheel Spacers (Contemplated between 20mm and 25mm and found out there are 22mm spacers available from Ichiba)
- LED Vanity Lights (Ordered 5K from V-LED)
- Got portable vacuum (One that powered by cigarette jack)
- GTSpec Rear Tie Brace
- Air Filter Changed for my Stillen High Flow Intake
- Plastidipped the stock grille leaving the Infiniti Logo chrome

Next,

Tires!!
Comtemplating between Yokohama Parada Spec-X and Hankook Ventus RH06. (275/45/20)
Now, currently running on Yoko for about 4 years and it is great!
Wanted to see how Hankook handles, but will see later which one I will get.

Followed by V-Leds Turn Signal LEDs (V3 Triton I believe?)
- Just waiting those to be in stock (6K is currently in backordered status or I can just get the 5K one)

Here are some pics (Springs still settling down):

[ATTACH=full]206207[/ATTACH]

[/URL][/IMG]

[/URL][/IMG]

 

[GEE50FX]

Very clean ride and it is sitting nice with the springs and spacers.

 

[GetLuckiFX]

Reverse angel eye? Lol looks cool

Sent from my SAMSUNG-SGH-I337

That was one of the original plans, but left the reverse lights as is, so the AE will have a different use )

 

[HanJo Lee]

Thank you!

Very clean ride and it is sitting nice with the springs and spacers.

 

[PMG 705]

Oil change (no mess with the fumoto valve), wash and sealed for winter.



TapaTalkin'