TC6 Ball-joint rear kit

[soonster]

Once all sold, unlikely to be re-stocked or re-manufactured.

================================================== =======================




Click here to view the original image of 1000x632px.

 

[wbama387]

I will take them. What is your paypal?

 

[soonster]

William, USPS tracking shows delivered status. All good?

 

[ocal21]

Look at Soon always looking out for members on , by the way thanks for the updated item you hooked me up with.

 

[soonster]

re-stocked: 2 kits available - $100 per kit, shipped to the 48 States (USPS priority with tracking).

 

[Jtnpcfx]

I finally decided on the Akebono bbk for my '06 45 from Concept Z Performance. So, I will need this kit to retrofit the rear knuckles, correct?

 

[soonster]

Yes, this balljoint kit goes with the gen2 (fx50/fx35) rear knuckles.

Sent from my Nexus 7

 

[Jtnpcfx]

So, for gen1 do I need to buy gen2 knuckles as well as this kit?

 

[soonster]

So, for gen1 do I need to buy gen2 knuckles as well as this kit?

If you own a 2006 fx45 and want to retro fit the rear bbk akebono, you'll need this balljoint kit, gen2 rear knuckles, rear bbk calipers, fx50 rear rotors (g37/370z/m56 rear rotors wont work due to the smaller parking brake hat) , and trimming of the rear dust shield.

Sent from my Nexus 7

 

[Jtnpcfx]

Thanks Soonster. Just what I needed. Now to find rear knuckles for a better deal than the $359 dealer price....

 

[soonster]

Ugh.I know, but it'll be stock replacements for now (tax season). Slotted Cryos, lines & Porter pads that I already had. We'll see if they hold up to my beating

Understood, priorities comes first.



Just a clear understanding, the kit includes the following:

 

[soonster]

Yeah the dust shield needs to be trimmed a bit just to make a little room. I have had to do this on other vehicles previously. No big deal.

I'm buying a set of the bolts from Soonster. Might as well before they become extinct. Still not entirely sure what my plans are but if I don't buy these and I want to do the retro later I am going to kick myself.

Thanks Soonster! :rotfl:

Great, they are limited supplies remaining (~10 qty) and unlikely to be reproduced by Turbocad.

 

[shadow191]

And that's why I picked up a set. Everything else is off the shelf, but without these, it's not a feasible project since you'd have to get a set custom machined.

 

[spersad11417]

Debating on whether to pick up a set just incase i decide not to sell the car in the summer. If i dont sell the car and dont pick up a kit ill be kicking myself everytime i see my rear brakes :at-wits-end:

 

[J3FF3R$0N]

Debating on whether to pick up a set just incase i decide not to sell the car in the summer. If i dont sell the car and dont pick up a kit ill be kicking myself everytime i see my rear brakes :at-wits-end:

if you pick them up and dont use them I dont think you would have a hard time selling them for what you paid for them

 

[spersad11417]

if you pick them up and dont use them I dont think you would have a hard time selling them for what you paid for them

I was thinking the same thing too. I might just end up buying a kit just incase. Anyways who do i get it from? Thanks

 

[soonster]

I'm the balls dealer if shipped or meet the "MAN" directly at his shop in picking these up.

 

[spersad11417]

Okay thanks so ill pm turbocad when im ready to pick these up since im local. Thanks

 

[soonster]

PM me and I'll provide you his address and contact #. I'm sure his pm box is overloaded, it was last I checked.

---------- Post added at 07:31 PM ---------- Previous post was at 05:49 PM ----------

UPDATE: only 5 sets of these "TC6 Ball-joint rear kit" left.

 

[Jtnpcfx]

Soonster, I would like to buy that kit. I can PayPal you the money. Let me know how to proceed.