Qeustion for angel eye

D

daidaic

Member
Location
Burnaby
Does anyone know why my angel eye could not be fully light up??( the bigger ring)

Only half of it could be light up with the new invertor that sent by Tummy from, if I used the marked 95mm invertor on the large ring, the ring could fully light up, but it's not as bright as the small ring...

and I msged Tummy, he told me to use 95mm invertor on the small ring and use the unmarked new invertor on the large one, this method just didnt work well, hope someone can give me any other suggestion thanks
 
Not sure if this is the same, but with my fish tank if only one wire is connected on my bulbs only half of the light is lit. Make sure you have good connections and a good ground and see if it gets better. Also check the voltage coming from the inverter with a multimeter.
 
I installed those rings myself, and i connected it direct to the battery for testing

y1pZkHAFqdNqDy17vVhvMPKakWakBYLaEiKfMr6jgRqUhQUAB1ArxDZBjne7WEDPZhcZAJmNAcY-JY
here is the pic that i took when i used the new invertor

if i use the old 95mm invertor, this large ring can be fully light up, but just not as bright as the small one
 
both new invertor do almost the same thing for this ring
one is as the pic, the ring only left light on the left
one is light on the top of the ring

i didnt try other ring yet, bec i cut the wire and make the wire longer and i havent connnected it together
or the problem is that i didnt connect it properly??
 
Last edited:
Possibly another bad batch of the new inverters? :mad:

Hope not. But I have yet to test any of my new inverters I got from Tummy. Has anyone else tested their replacement inverters?
 
daidaic said:
both new invertor do almost the same thing for this ring
one is as the pic, the ring only left light on the left
one is light on the top of the ring

i didnt try other ring yet, bec i cut the wire and make the wire longer and i havent connnected it together
or the problem is that i didnt connect it properly??
Click to expand...

If both inverters do the same thing on the same ring than it is more than likely the ring or one of the wires to the ring.
 
You must log in or register to reply here.
Back
Top