edking310
Member
- Location
- los angeles
- Car
- 2004 Infiniti Fx35 Awd
ok so found some parts here ran 150 for both valve covers does anyone know if this job requires and gasket seal sealant ?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Oil Leaks - Somebody please help me
- Thread starter edking310
- Start date
Do you have one side or the pair? Can I have it [emoji1].Man, there is comparison of the two valve cover that I have posted on here. Need to find that. Anyhow, I know the Max valve cover does not work on the FX.
I bought a Maxima cover to try out and know for sure it does not work for the FX. It is still in my basement if anyone want to try it. :smile (2):
The pass side should bolt on directly. A red/AWD vq35 is all the same, if it worka for the g35 guys, it should work for a fx. But the driver side will need custom work, like extending the wires to coilpack 6 and etc.
edking310
Member
- Location
- los angeles
- Car
- 2004 Infiniti Fx35 Awd
so did the job myself took about 4 hours broke a hose connected to the valve cover on the top side replaced it with a hose from autozone ran it runs good so far but this morning i turned it on and was good i stopped by gas station to get coffee and when i turned it one it sounded like it was on but had turned off i panicked and turned it on gain and gave it gas and it stayed on any ideas?
Share: