- Car
- Infiniti FX 35 Limited Edition
- Name
- Rip Singh
+1 let's see it bro
OEM Aero Front Spoiler Instructions
- Thread starter GEE50FX
- Start date
+1 let's see it bro
- Car
- 2010 White FX50S-sold
- Name
- Wayne
Do it, front spoiler is easy , just take your time and follow the instructions.Procrastinating on the install.I will defeat it
Chris
GFortFX
Member
- Car
- 2009 FX35 AWD
- Name
- Greg
Anybody have any thoughts as to the cure time of the double sided tape? Any issues if it gets wet the night of the application? Don't have a covered space to keep my FX overnight, just want to be sure rain/dew wont harm it.. Maybe I'll keep a plastic sheet over the bumper for the night..
NorcalFX
Member
- Car
- 2013 FX37 AWD
Install instructions say to not let it get wet for 24 hours. I didn't wash/wax my chin spoiler until 48 hours just to be safe.
skywalker999
Member
- Car
- 2011 fx35 AWD
- Name
- GM
Great right up Gee50fx
UPS just delivered today my front aero kit can't wait to install it but must wait for warmer weather, but with dose pics should make it easier to install
UPS just delivered today my front aero kit can't wait to install it but must wait for warmer weather, but with dose pics should make it easier to install
Last edited:
GFortFX
Member
- Car
- 2009 FX35 AWD
- Name
- Greg
Looks like it's still for sale through this website: http://parts.infinitiusa.com/infini...ction=accessories&itemid=154830&catalogid=212
- Car
- 2011 FX35 AWD
It should fit. You have to look it up under model years 2009-2011 for it to pull up on Infiniti's website.
GFortFX
Member
- Car
- 2009 FX35 AWD
- Name
- Greg
Finally getting weather warm enough to install my aero lip this weekend, was taking a close look at my front bumper and noticed this crack for the first time on my passenger side..
Guessing I should delay putting the lip on until I fix this? Not sure sure how to go about it.. normally would fill it with a little bondo and paint it, but I'm worried the weight of the lip might cause it to flex... could anyone offer any suggestions?
Guessing I should delay putting the lip on until I fix this? Not sure sure how to go about it.. normally would fill it with a little bondo and paint it, but I'm worried the weight of the lip might cause it to flex... could anyone offer any suggestions?
Attachments
- Car
- 2014 qx70s
- Name
- Edwin
I would just fill it with alil plastic weld. Just in the crack tho. Also add plastic weld on the inner section of the crack for strenght. Lip wont bother it since its gona be double side molding tape glued right abobe the crack & supported by mid bumper section.Finally getting weather warm enough to install my aero lip this weekend, was taking a close look at my front bumper and noticed this crack for the first time on my passenger side..
Guessing I should delay putting the lip on until I fix this? Not sure sure how to go about it.. normally would fill it with a little bondo and paint it, but I'm worried the weight of the lip might cause it to flex... could anyone offer any suggestions?
Attachments
Last edited:
- Car
- 2010 White FX50S-sold
- Name
- Wayne
Yes, look at my pics in this thread and you can see where the two sided tape on the lip is above this here is the pics:https://www.infinitiscene.com/searc...ront-Spoiler-Instructions?p=209012#post209012
NorcalFX
Member
- Car
- 2013 FX37 AWD
yup, as well as the painted portion of the original front bumper.