Handy_Andy's Mini Meets

So does the module work or no? i've seen both responses through the forums. I've also seen that this can be done without the module. Any idea how? (One member did it with a seperate switch to fogs). I'd appreciate it if you could guide with any of these. Thanx
 
The module should work. My first attempt, I tab the wrong wires. I will have a chance to finish this wiring up this Sunday. I will post up then.
 
Needless to say, the KP Technologies MX20 Control Module does work! I will post my version of the DIY later.
 
The AE wired independently. They're currently wired to the parking light. If you want the AE to be on and off with the fogs, just connect the +12V wire of the AE to relay pin 30 in the batter compartment.
 
Calling for all MWFX and local area FXs... It's the 2nd Annual Handy Andy Install Meet
Last year we had a Liquid Copper. This year we have a Blue Zebra.
If you have time to swing by and join us. Come on out, say hello and put faces on their avatar.
It's family event, so your wife, kids and girlfriends/boyfriends are all welcomed.


All day Sunday April 21st
1. la_fx35
2. zebra555
3.
4.
5.
6.
 
You must log in or register to reply here.
Back
Top