H&R springs now available from allsprings.com!!
- Thread starter Jmess86
- Start date
- Car
- 2010 White FX50S-sold
- Name
- Wayne
Looks great Jesse and nice pics. Good job 
The drop does look about the same as the Eibachs, it's hard to see much difference from the Eibach drop. They will probably settle a tad more. It looks so much better than the stock height.
The drop does look about the same as the Eibachs, it's hard to see much difference from the Eibach drop. They will probably settle a tad more. It looks so much better than the stock height.
Last edited:
Lerry@ARKperformance
Member
looking good, I think these H&Rs are the same rear visually but the front it noticeably a better drop than the Eibachs imo. Let me us know how it is after it settles and the ride quality.
Lerry@ARKperformance
Member
+0.5 lol
Wayne - Thanks, glad I got to do it myself & with a buddy. Ended up saving a couple hundred going that route. And its a lot better than stock height.
Lerry - Thanks also, IMO it is a more noticeable drop than the eibachs. Once I lowered the jack from the front and let it settle a bit I could see the difference. I'm sure after a few months it'll drop down another 1/2-3/4 of an inch.
Everyone else : I'll try and take some pics in the morning. Gotta get it aligned as well before I start driving it.. even though my buddy that helped me thinks the negative rear camber looks sick
---------- Post added at 10:24 PM ---------- Previous post was at 10:16 PM ----------
I used R1 Concepts rotors and stoptech pads direct from their site.
Lerry - Thanks also, IMO it is a more noticeable drop than the eibachs. Once I lowered the jack from the front and let it settle a bit I could see the difference. I'm sure after a few months it'll drop down another 1/2-3/4 of an inch.
Everyone else : I'll try and take some pics in the morning. Gotta get it aligned as well before I start driving it.. even though my buddy that helped me thinks the negative rear camber looks sick
---------- Post added at 10:24 PM ---------- Previous post was at 10:16 PM ----------
I used R1 Concepts rotors and stoptech pads direct from their site.
- Car
- 2007 FX35 AWD
Rides looking sweet. R1 concepts is good stuff. Just put on their rotors the other day.
Sent from my iPhone
Didn't get it aligned this morning because my buddy that works at a shop took the day off so I will go Monday. So all these pics are still with the negative camber but are much better pics than I took the other day. As far as the ride, pretty big difference. Handling is a lot better and the ride is a lot better than what I had thought it would of been. I'm sure if I was rockin 24's it would be a lot worse, esp on roads where I live. Anyway enjoy the pics. (obviously the last pics looks like its a lot lower b/c of the weight distributed on the passenger side from the hill)
View attachment 233653
View attachment 233653Attachments
Last edited:
- Car
- 2010 White FX50S-sold
- Name
- Wayne
I thought it would be interesting to see the difference in drop between the H&Rs and the Eibachs, so here is a pic with H&R and a pic with Eibach. I hope you don't mind me posting this on your thread Jesse
Jesse's with H&R
Mine with Eibachs (it's not too clean
, and I have to get my front spoiler on, it looks sooo much nicer)
Attachments
Lerry@ARKperformance
Member
i just realized all our colors are the same
and it looks a tad bit lower, both looking really good!
and it looks a tad bit lower, both looking really good!
Measurement from the fender to the center cap on the wheel might be accurate
