GT SPEC Mid chassis ladder brace Feeler - GB

Status
Not open for further replies.
there - i moved all the info from the other thread over to this one.....so use this one for the feeler.
 
Thanks man!!!

---------- Post added at 06:47 PM ---------- Previous post was at 03:57 PM ----------

this are links of pictures for the brace we are trying GTspec to make for our fx.. This is for the members that like visual better than words. Lol

The Mid chassis ladder brace

http://z1auto.com/images/gtnew350zmidbrace.jpg

This is how it might look installed on our FX.

http://z1auto.com/image.asp?img=gtladderbrace1.jpg

This will be the list for a possible GB for this brace, feel free to add your name to it. I'll try to get a good price if there are enough members.
1.Rubare
2.GTO
3.Turbocad6
4.
5.
 
I know Im new but..And now that we know this might happened to all IS member.. If you are interested in it just add your name to this so by the time they make them (if they do) we already have a list and can go on from there..
1. Rubare
2. gto
3. turbocad6
4. hanzofx
5.
 
ok so i PMed GTSPEC (mark) and he said that if we get 20 buyers he'll make sure this project gets move to a priority status.. in other words he'll make it happened..

i havent email Ken (also a GTSPEC rep) and ask him what is it that we need to get this going.. he told me to PM mid august and its not Mid august yet..

personaly i see this project happenning lets keep this going guys!!

i keep you guys n touch!
 
Last edited:
I might as well be in this too =)

1. Rubare
2. gto
3. turbocad6
4. hanzofx
5. HumbertoCALI
6. aiya
7. White_Hair
8. BaBaLuwee
9. HYME
 
Update.. I contacted Ken again.. I'm waiting on his reply. This would be the moment of true.. Is either a yes or no so cross your fingers.. Sorry I took so long to do this. I came back from Canada and everything have being really busy.

I'll keep you guys posted..
 
Well I'm organizing it.. Elguapo.. Trying to see if gtspec make a batch of these braces for our fxes.. Why?
 
Rubare said:
Well I'm organizing it.. Elguapo.. Trying to see if gtspec make a batch of these braces for our fxes.. Why?
Click to expand...

he is asking because, you wont be able to sell it unless you are a dealer for GTSPEC. :wink:

since elquapo is a dealer, im sure he doesnt want to step on the other dealer foot who posted on this thread.

:biggrin:
 
1. Rubare
2. gto
3. turbocad6
4. hanzofx
5. HumbertoCALI
6. aiya
7. White_Hair
8. BaBaLuwee
9. HYME
10. gchristopher9
11. Logan

---------- Post added at 09:17 AM ---------- Previous post was at 08:52 AM ----------

Curious to see where the GTS-SUS-1131 4pt. mid ladder attaches in conjunction with the GTS-SUS-1131 4pt. front ladder.

If it works out sounds like some of us are going to be running a fair amount of aircraft aluminum on our rides....
 
Last edited:
Logan said:
---------- Post added at 09:17 AM ---------- Previous post was at 08:52 AM ----------

[/COLOR]Curious to see where the GTS-SUS-1131 4pt. mid ladder attaches in conjunction with the GTS-SUS-1131 4pt. front ladder.

If it works out sounds like some of us are going to be running a fair amount of aircraft aluminum on our rides....
Click to expand...

When I measured the distances & compared those to GTSpec values, these were the places I identified:

rearmountingp.jpg
distance.jpg

Basically, the front of the brace goes over the cats and the rear would go over y-mid pipe flange. I might be wrong though as I didn't have the brace in hand. These were the only mounting spots that matched the GTSpec distances and it looked like they were in line with the 350Z images I saw on the net.

Plus my neck nearly broke trying to take those shots so never tried again :tongue:
 

Attachments

  • rearmountingp.jpg
    rearmountingp.jpg
    123.5 KB · Views: 15
  • distance.jpg
    distance.jpg
    119.5 KB · Views: 17
Status
Not open for further replies.
Back
Top