GEE50FX :: 2010 Infiniti FX50S AWD

[gto]

Dealers :/
Shady, or Possible they didnt know. I would think they would use a good shop if they did the repair, but who really knows.

 

[teddis]

Looks fantastic Wayne....I am really starting to dig white, lol

looking forward to the spacer pics !!
T

 

[GEE50FX]

Thanks Terry, I should have the new spacers on next weekend.

---------- Post added at 12:48 PM ---------- Previous post was at 12:34 PM ----------

Dealers :/
Shady, or Possible they didnt know. I would think they would use a good shop if they did the repair, but who really knows.

Newmarket Infiniti is not a good Dealer at all. When I bought the car from them I had them change to Mobil 1, I got home and the drain plug leaked like a sieve on my newly poured garage floor. I had to pull the plug and install a new gasket, it was very obvious they used the old one. I complained my AC compressor was noisy, they checked it out and said it was fine. I then stopped at my regular Dealer, Guelph Infiniti and they checked it out and they ordered and installed ah new compressor right away under warranty.
These are just a sampling of Newmarket Infinitis poor workmanship and customer service, they suck.

I highly recommend Guelph Infiniti, I have used them for 4 Infinitis over the years and they always were excellent.

 

[gto]

Reminds me when an Acura dealer stripped Oil drain plug on my new Integra. If they had just used a 17. Think they would know that

---------- Post added at 10:41 AM ---------- Previous post was at 10:40 AM ----------

Lol. And a fresh door ding. They Denied both

 

[GEE50FX]

Ouch :eek.: ^^^^

 

[PMG 705]

I'll need you to get in that boat and steam down Lake Michigan to Chicago Wayne

PMG

 

[GEE50FX]

haha, be right there Ian, I'll pick you up by Navy Pier Park.

 

[teddis]

Wayne, I did not actually see anywhere for a seal. Just all went back together the way it came out.

What do you use to get your wheels off without damaging the rims Wayne ? do you have a special key ?

 

[GEE50FX]

Wayne, I did not actually see anywhere for a seal. Just all went back together the way it came out.

What do you use to get your wheels off without damaging the rims Wayne ? do you have a special key ?

I'll PM you tonight Terry.

 

[GEE50FX]

Installed my 20mm H&R Spacers that I purchased through Zebra on the rear wheels.

Here is a before pic with no Spacer



Here is a pic with the 20mm H&R Spacer installed, it is exactly the way I wanted them.

 

[RIPnFX]

Looks perfect I had 20mm on the rear as well when I had my 21's.

 

[gto]

Way better. More pics?

 

[Cruiser]

Nice stance Wayne.

 

[Ed@TunerStore]

Looking good Wayne!

 

[GEE50FX]

Thanks fellas. I went for a quick run at highway speeds and they ran nice and smooth.
I also like these H&R spacers much better than the Ichiba V2 spacers.

 

[Themechanic]

That actually gives it a nice stance. Looks great!

 

[GEE50FX]

Thanks Edwin.

 

[PEEJ]

Perfect! I thought you already had spacers. Don't know where I got that idea.

 

[GEE50FX]

Perfect! I thought you already had spacers. Don't know where I got that idea.

I did have spacers before Patrick, but they were 15mm and I wanted to push them out just a bit more so I went with 20mm. That 5 mm makes a big difference, they are exactly where I wanted them to sit.

 

[albertacruiser]

Hi Wayne i had a tough time deciding color to exactly do so i did a set in a Ultra Black Chrome by Prismatic and another in Semi Gloss back. I mounted my Dunlops which we new last year on the Ultra Black and I have just found a set of Bridgestone take offs with 9 and 10 32nds on them to mount on the Black. I will try and post some pictures as soon as I reach 25 posts but the ones that I don't keep I will be selling. I had them done by Impact Coatings in Edmonton and did a great job in not just the powdering but the repairing and cleaning up of all the minor imperfections. Do you know what the market is for a set of 21's?