No, haven't touched it yet, pic is from the same day as the other ones. I could still go lower .25" in the front and at least another 1.5" in the rear.
I hope more people buy these soon!!!
BC Coilovers Info & Unboxing (03-08 FX35/FX45)
- Thread starter fxlr8
- Start date
No, haven't touched it yet, pic is from the same day as the other ones. I could still go lower .25" in the front and at least another 1.5" in the rear.
I hope more people buy these soon!!!
- Location
- Fountain Valley, CA
- Name
- Alex
ohh wow how much was this again
http://www.importimageracing.com/p/BC-Racing-BR-Series-Coilover-Kit.html
Well worth it, especially if you need new shocks and struts anyways.
Well worth it, especially if you need new shocks and struts anyways.
- Location
- Fountain Valley, CA
- Name
- Alex
RAWR I WANT THESE!!! lol
- Location
- Southern California
looks awesome .... ya I would raise the fronts for sure. the latest measurements is crazy low
- Location
- Fountain Valley, CA
- Name
- Alex
edit =]
- Location
- Southern California
more sexy the your 15" drop 
lol
lol - Location
- Fountain Valley, CA
- Name
- Alex
hell yea =]
- Location
- Dallas, TX
- Car
- 2007 FX35 RWD
Bump ^
PELON
Member
- Location
- riverside ca.
- Car
- 1997 VR4
So have you had alignment yet? I want to do this but am concerned about front axle angles don't know. I would like to get another 1/2 in front and 3/4 or so in rear looks like this would do it .
- Location
- Houston,Tx
- Car
- 2007 Infiniti FX35 AWD
Re: BC Racing Coilovers Info & Unboxing (03-08 FX35/FX45)
WOW!!that looks so good, have u takin it around any quick corners yet to see if it rubs?
Sent from my Behold II
WOW!!that looks so good, have u takin it around any quick corners yet to see if it rubs?
Sent from my Behold II
Haven't had an alignment yet, still trying to figure out the height I want first. We are both running 275/40/20's and these can get low enough to get rid of the gap with these tires. I am sure you would be happy. Only problem so far is the belly pan is too low in the front.
I have taken it on some fast turns and have no rubbing at all on a 25et offset, my tires are slightly tucked. Handles great on turns.
- Location
- Houston,Tx
- Car
- 2007 Infiniti FX35 AWD
Re: BC Racing Coilovers Info & Unboxing (03-08 FX35/FX45)
wait i just made myself cry a little bit
Sent from my Behold II
i swear all you guys are not making it easy for me cuz my to do list is as long as my fx and i don't have an fx yet lol...
wait i just made myself cry a little bit
Sent from my Behold II
- Location
- South Gate, CA
- Car
- 2003 FX45 AWD
Squaking is definitely the cvt joint or the bearings. I had the same initial squeaks before I ble the front Axel and cvt joint that connects to the front wheel. It has to do with the angle of it.
Even though it is designed to flex and move, it is no designed to be at that angle full time. A small degree of change of the joint is ok but not recommended.
As far as I can see it is flexed almost all the way.
John might have a better insight on this. Just my experience.
Even though it is designed to flex and move, it is no designed to be at that angle full time. A small degree of change of the joint is ok but not recommended.
As far as I can see it is flexed almost all the way.
John might have a better insight on this. Just my experience.
- Location
- Dallas, TX
- Car
- 2007 FX35 RWD
That part that is giving you problems, is it only on AWD?
- Location
- South Gate, CA
- Car
- 2003 FX45 AWD
- Location
- Dallas, TX
- Car
- 2007 FX35 RWD
Ok thanks! I asked twice before and no one answered, but I assumed it was the front drive axle for AWD.