2010 Paddle Shifters
- Thread starter Saleen00_227
- Start date
:party: Almost there woo!! How accurately do these brackets align with the paddles? I guess what my main concern is any small deviance that may cause fitment issues with paddles hitting the steering cover.
Here is the complete bracket kit!
The bracket is made of stainless steel.
I finished 10 kits.
Paddle shifter Bracket set
Connectors with wires set
A04 FW connector for right side (up) paddle shifter
A03 FW connector for left side (down) paddle shifter
Terminals for "TH40FW-NH" connector behind A/V box! The terminal is as same as OEM terminal.
Green wire --> Up shifter
Orange wie --> Down shifter
To connect black wires to ground (e.g. Metal body)!
---------- Post added at 05:57 PM ---------- Previous post was at 04:16 PM ----------
Hello everyone!
Please forgive me.
Because my English is not well, I just show some photos to instead of insalling description here.
So, the bracket kit is not including installing description when you buy it from me!
The other problem! These days, I try to sell on eBay, but I think it is diffcult to me.
So, I think tradeing is easy for me by paypal.
I am going to send you a invoice by paypal.
The bracket is made of stainless steel.
I finished 10 kits.
Paddle shifter Bracket set
Connectors with wires set
A04 FW connector for right side (up) paddle shifter
A03 FW connector for left side (down) paddle shifter
Terminals for "TH40FW-NH" connector behind A/V box! The terminal is as same as OEM terminal.
Green wire --> Up shifter
Orange wie --> Down shifter
To connect black wires to ground (e.g. Metal body)!
---------- Post added at 05:57 PM ---------- Previous post was at 04:16 PM ----------
Hello everyone!
Please forgive me.
Because my English is not well, I just show some photos to instead of insalling description here.
So, the bracket kit is not including installing description when you buy it from me!
The other problem! These days, I try to sell on eBay, but I think it is diffcult to me.
So, I think tradeing is easy for me by paypal.
I am going to send you a invoice by paypal.
Attachments
Last edited:
- Car
- FX
rex9271
Please read the following https://www.infinitiscene.com/search/1/?q=announcement.php?a=7
It's awesome that you were able to make a kit for this. You are going to make a lot of people happy with this
Please go through the above link and make a proper advertisement in the classifieds/vendor section.
TapaTalkin'
Please read the following https://www.infinitiscene.com/search/1/?q=announcement.php?a=7
It's awesome that you were able to make a kit for this. You are going to make a lot of people happy with this
Please go through the above link and make a proper advertisement in the classifieds/vendor section. TapaTalkin'
Thanks man... i thought so, but one could hope.... :disapointed:
I hope he still checking the site from time to time :pray:, and maybe stumbles upon this thread. His inbox is full, and won't take any more private messages :disapointed:
About: Installing brakets and paddle shifters
Pay attention. Please.
At first, yo don't have to remove air bag and steering wheel
But, if you want to remve them. It should be OK,too.
https://www.infinitiscene.com/searc...le-Shifter-bracket-kit-for-EX-amp-2Gen-FX-115
remove these 2 screws
Make the motor down
Centeral bracket
Make motor back
Check this centeal bracket, then screw it with the motor.
Assemble paddles and brackets
[imghttps://lh6.googleusercontent.com/-wlzhXK80aAQ/Uv-579qJ-KI/AAAAAAAAANs/2agMZ9Fwsp8/s945-no/004.JPG][/img]
Srew Paddle braket and centeral bracket. Make paddle bracket close to black plastic.
If it is necessary , You can adjust like green lines.
Pay attention~
This is inside face.
Pay attention~
This i outside face
Pay attention. Please.
At first, yo don't have to remove air bag and steering wheel
But, if you want to remve them. It should be OK,too.
https://www.infinitiscene.com/searc...le-Shifter-bracket-kit-for-EX-amp-2Gen-FX-115
remove these 2 screws
Make the motor down
Centeral bracket
Make motor back
Check this centeal bracket, then screw it with the motor.
Assemble paddles and brackets
[imghttps://lh6.googleusercontent.com/-wlzhXK80aAQ/Uv-579qJ-KI/AAAAAAAAANs/2agMZ9Fwsp8/s945-no/004.JPG][/img]
Srew Paddle braket and centeral bracket. Make paddle bracket close to black plastic.
If it is necessary , You can adjust like green lines.
Pay attention~
This is inside face.
Pay attention~
This i outside face
Attachments
Last edited:
