2010 Paddle Shifters

[sobi6111]

Anyone? How to seperate switch ?

 

[sobi6111]

Finally done it took me good 2 hours to do slowly

 

[Saleen00_227]

nice! thanks for the pics.

 

[sobi6111]

nice! thanks for the pics.

By the way hardest part to do for me,was to put plastic cover around it :-( it is 4 piece and took me a while to fit them nicely.
Is there any order you should follow? as one of my piece didn't fit 100% correctly

 

[Saleen00_227]

top and bottom first. Sides should be last. Keep in mind that the top piece has a little plastic piece that i had to cut. Was located on the inside middle.

 

[Jason]

Has anyone tried this on the 2011s yet?

 

[sobi6111]

Has anyone tried this on the 2011s yet?

Should be same way. Try as no redesign was done on nav/audio system

 

[PMG 705]

Congrats Sobi!! Way to stick through it and get the job done.

 

[edmarin]

Took Apart my 2010 FX35 AWD today and gave me confirmation that we are NOT pre-wired for them . We do, however, have the mounts for them though. Here are some pics that i took.

This is a pic taken from the bottom looking up at the harness.



Heres the left and right side mounts.

Im ordering the paddles but quick question how did you take the cover off ?

 

[Saleen00_227]

2 screws and its snaps off.

 

[edmarin]

just got mine from ups will work on it tonite and post pics ubber excited:smile (2):

 

[sobi6111]

just got mine from ups will work on it tonite and post pics ubber excited:smile (2):

Done yet?

 

[edmarin]

Done yet?

i actually started working on it today did the graveyard shift last night so i couldnt do it and all i can say it looks sweet and badass and it took me an hour and 15 to do it boy i bet i save a lot by not goin to a stealership haha :smile (2):

 

[sobi6111]

i actually started working on it today did the graveyard shift last night so i couldnt do it and all i can say it looks sweet and badass and it took me an hour and 15 to do it boy i bet i save a lot by not goin to a stealership haha :smile (2):

Congratualuations. Post picture.

Dealer won't do it for you. I tried,as I was scared to do it at first. They said "F* NO" :tongue (2):

It voids your warranty to mess with harness and blah blah blah
And even if they would do ,it would cost 2 labor hours,so $180+

 

[edmarin]

Here are some pics

 

[Wuufer001]

^nice, how long did it take you?

 

[edmarin]

a little over an hour its badass

 

[Wuufer001]

quick question when using

on my wife's GTI, i am able to downshift directly just using the paddle instead of shifting the gear to 'S' so i can make an instant downshift when to pass a car. is this possible or i need to shift to 'S' first in order to work the paddle shifters?

 

[edmarin]

dont kno bout gti but im am sure u need to ut it in s, becuz on the fx u can shift on the paddle when on DS BUT i can do the same on D so try to shift the paddle when in d if it cant it cant

 

[Saleen00_227]

Congratualuations. Post picture.

Dealer won't do it for you. I tried,as I was scared to do it at first. They said "F* NO" :tongue (2):

It voids your warranty to mess with harness and blah blah blah
And even if they would do ,it would cost 2 labor hours,so $180+

When i first thought of doing this i went to Metro infiniti and told them what i wanted to do. The parts manager told me its impossible cause they are not wired for them ....the program is not there..... also gave me expensive prices on the parts. So i bought from riverside infiniti.