Lola vk :: 2003 infiniti fx45

Overview Discussion
ocal21 said:
Ow o you like your manta ray induction?
Click to expand...
Honestly I couldn't be more pleased with the Manta Ray, Proven to be reliable thus far. I have seen some MPG gains over stock and dresses up the Engine bay well!

---------- Post added at 10:07 AM ---------- Previous post was at 10:04 AM ----------
AeroBFA said:
And what's the status of the E-fan mod too? I'm looking to do that in springtime.
Click to expand...
E-fan mod is ready to be installed, have all the parts. Just wanted to get the Pulley done at the same time. Hope I'm not waiting forever.
 
Kido coilovers installed, rolled Rear & Front fenders. Very minor cracking when rolling the fenders but the E-coat was still on solid underneath, nothing a little undercoating won't fix. Here are some process pics below. Will post more when she's back together, broke most of the rear wheel well moulding clips during removal. Ordered should be in tomorrow.003-5.jpg002-4.jpg003-4.jpg








015.jpg005-4.jpg004-3.jpg016.jpg024-1.jpg029-1.jpg020-1.jpg

---------- Post added at 02:08 PM ---------- Previous post was at 02:04 PM ----------

004-4.jpg006-1.jpg008-4.jpg
 

Attachments

  • 003-5.jpg
    003-5.jpg
    86.2 KB · Views: 33
  • 002-4.jpg
    002-4.jpg
    144.2 KB · Views: 25
  • 003-4.jpg
    003-4.jpg
    217.5 KB · Views: 28
  • 005-4.jpg
    005-4.jpg
    122.6 KB · Views: 29
  • 015.jpg
    015.jpg
    184.1 KB · Views: 30
  • 029-1.jpg
    029-1.jpg
    172.5 KB · Views: 28
  • 024-1.jpg
    024-1.jpg
    84.8 KB · Views: 27
  • 016.jpg
    016.jpg
    132.4 KB · Views: 28
  • 004-3.jpg
    004-3.jpg
    178.5 KB · Views: 27
  • 006-1.jpg
    006-1.jpg
    165.3 KB · Views: 27
  • 004-4.jpg
    004-4.jpg
    142.6 KB · Views: 28
  • 020-1.jpg
    020-1.jpg
    145.6 KB · Views: 33
  • 008-4.jpg
    008-4.jpg
    196.6 KB · Views: 26
Last edited:
The pics will come soon, I'm excited. Big thanks to my Chicago crew! Andrew for being gracious and loaning me the roller and to HA for bringing it by and your knowledge, you guys are great!
 
Low-La pics
024-2.jpg011-1.jpg022-1.jpg025.jpg026.jpg021-1.jpg
 

Attachments

  • 022-1.jpg
    022-1.jpg
    150.4 KB · Views: 34
  • 011-1.jpg
    011-1.jpg
    132.7 KB · Views: 24
  • 024-2.jpg
    024-2.jpg
    89.6 KB · Views: 30
  • 021-1.jpg
    021-1.jpg
    182.8 KB · Views: 38
  • 026.jpg
    026.jpg
    194.2 KB · Views: 30
  • 025.jpg
    025.jpg
    144.6 KB · Views: 30
Thanks everyone, I really like how it's sitting. Fronts are about 1/2 inch from the start of the mouldings, rears look pretty flush. I may go lower before my alighnment when I put the new wheels on.
^Yes Ed, I did. Had the fender roller and was in the do stuff mood so I thought, sure why not. It might help with minor rubbing, but I have yet to hear or feel anything touching. Rear is set soft as possible, Fronts are at 12 clicks + Def gonna buy the rear camber kit, but for now it corners like it's on rails.
 
Last edited:
AeroBFA said:
Lookn' good Joe. You must love how it drives now. Different beast right? Set it off with 25mm spacers I say! :top:
Click to expand...

Thanks, I absolutly love the way she handles now! Night and day difference.
The offset on the Axis wheels I'm putting on will take care of the gap, no need for spacers.

---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
la_fx35 said:
Looking good Joe. I thought you gonna drop her some more.
Click to expand...
Thank you, I prob will go lower as I said, but I want to get the new wheels on first and adjust from there.
 
You must log in or register to reply here.
Back
Top