+2 mod loaner program

I was trying to do the +2 for VanFX (06, Sports Package, US Model). However, the cipher shows up an error message "Unable to identify ECU", but it can read the BCM and ABS parameters. I then tried to test that on my 03 and everything works fine. ILovemyFX's 06 Canadian version works fine as well.

Did anyone experience this problem?
 
2. DMV Rubare (NYC area)
3. Phantom (Toronto, Canada area) & Rob35 (Toronto, Canada area)
4. SCiS theMerchant (SoCal area)
5. fxlr8 (SD)
6. Whitehair (Vancouver, Canada area) & IlovemyFx (Vancouver, Canada area)
7. jumbosrule - (houston TX area)
8. aiya (NYC)

Let's get this back to NY and try again...rumor has it that a fix for the '08s have been found.
 
aiya said:
2. DMV Rubare (NYC area)
3. Phantom (Toronto, Canada area) & Rob35 (Toronto, Canada area)
4. SCiS theMerchant (SoCal area)
5. fxlr8 (SD)
6. Whitehair (Vancouver, Canada area) & IlovemyFx (Vancouver, Canada area)
7. jumbosrule - (houston TX area)
8. aiya (NYC)

Let's get this back to NY and try again...rumor has it that a fix for the '08s have been found.
Click to expand...

If it didn't work, I will paypal you the shipping back to Beast. :wink:
 
In the V1.03 software, there is a Cable Manager utility to update the cable firmware. In that utility folder, there is the latest cable firmware dated Oct 20, 2009. V1.70. After update the cable firmware with the cable manager. The problem of "Unable to identify ECU" problems on the 08 FX35 (US Model) we have tried is no longer there. We were able to adjust the timing successfully and we verified by shutting the car off to check if the +2 stays. And it did.
 
5. fxlr8 (SD)
6. Whitehair (Vancouver, Canada area) & IlovemyFx (Vancouver, Canada area)
7. jumbosrule - (houston TX area)
8. aiya (NYC)

Jumbosrule rec'd tracking number - Cipher is back in the states. Might see it show up at my house tomorrow. Meeting with KNFX here in Houston to do the +2 on Saturday, unless it doesn't show. Plan to send it back to NYC next week, correct?
 
White_Hair said:
In the V1.03 software, there is a Cable Manager utility to update the cable firmware. In that utility folder, there is the latest cable firmware dated Oct 20, 2009. V1.70. After update the cable firmware with the cable manager. The problem of "Unable to identify ECU" problems on the 08 FX35 (US Model) we have tried is no longer there. We were able to adjust the timing successfully and we verified by shutting the car off to check if the +2 stays. And it did.
Click to expand...

Very nice White_Hair!
 
turbocad6 said:
I did try the latest software but seen nothing about the cable firmware update... awesome find whitehair :biggrin:
Click to expand...

Dr.2K said:
Very nice White_Hair!
Click to expand...

Glad to share my lucky finding. I am not an expert or someone with extensive knowledge about cars and mechanical stuff. I have learned so much from this forum without contributing much helpful information and I felt I finally have something that I can share and help some members out. :.smile:

Hope this will work on Aiya's FX.
 
White_Hair said:
Glad to share my lucky finding. I am not an expert or someone with extensive knowledge about cars and mechanical stuff. I have learned so much from this forum without contributing much helpful information and I felt I finally have something that I can share and help some members out. :.smile:

Hope this will work on Aiya's FX.
Click to expand...

nice job!!

I think aiya is doing this every day :laugh::
crossingfgs.jpg
 

Attachments

  • crossingfgs.jpg
    crossingfgs.jpg
    18.2 KB · Views: 41
You must log in or register to reply here.
Back
Top