Winter wheel help

[J3FF3R$0N]

I am looking at these wheels for winter they are 20" x 8.5 with a +25 offset, my queston is, is this a too agressive offset and will this clear FX50 BBK.

my summer wheels are 22" + 30 offset

 

[theMerchant]

you will have an extra 21 mm extended out, which should be fine. as for clearing the BBK, looks like it might, but from what turbocad said, it cant be fully determined by the offset, wheel design (spoke) comes into play also.

 

[J3FF3R$0N]

Thanks bro, My problem is I have the front BBK but have not installed yet,So i cant really test fit the wheel. I have the stock 18" wheels And I know they wont clear.

---------- Post added at 12:45 PM ---------- Previous post was at 08:46 AM ----------

....

 

[turbocad6]

offset is not enough to determine brake clearance...

you can test fit the wheel if you have the caliper, just unbolt & hang the stock caliper off to the side & temp put the caliper in place & see, or, you can try contacting the vendor/manufacturer & ask about brake clearance maybe... pretty hard to know otherwise...

 

[J3FF3R$0N]

If I test fit it on a FX50 and it clears should I be in the clear

 

[turbocad6]

definately...

 

[J3FF3R$0N]

OK perfect thanks, It would be easier to do that test fit thanks turbo !

 

[turbocad6]

good luck with it, nice looking wheel too

 

[J3FF3R$0N]

These are the wheels I want

cost me around $1500 the other ones I can trade my OEM 18" for so $1500 or $0.00

 

[Tko512iFX]

If you were getting the Axis for summer i'd say get them but if its just for winter id take the free ones

 

[J3FF3R$0N]

These are the same wheels on a Magnum it looks like it has prety big brakes on it so hopefully the fit