Vossen CVT on 2nd gen

F

FXThreeSeven

Member
Car
2013 FX37
I have my mind set on buying the 22x9 vossen cvt for my 37. On CariD.com, they have an option to let them pick the offsets for a guarantee fitment.
If i let them pick the offset, at the check out, it shows 22x9 et15. Does this fitment sound too agressive and have a poke? According to my measurements, this fitment would be flush in the front and a tad tucked in the rear but don't trust my measurements cause im not really familiar with rims fitment. BTW, tire size is going to be 265/40/22
 
It's not going to poke. It will tuck slightly in front and tuck more in rear. This all depends on your ride height and camber, but at stock height it still shouldn't poke.
 
^^ Listen to this. Concavity is dependent on rim width, so 10.5" will be much more concave that 9" and better looking.
 
Yeah, offset doesn't determine concavity, width does. Basically the wheels are cast in the same concavity depending on width. Offset is just determined by how much material they leave or remove from the backpad (the part that mates to your hub). ie, I have 10.5" concave wheels in an offset of +35 and +20. The concavity is the same on both, but the +35 has almost no material on the back pad, the spokes almost touch the brake hub. On the +20, there is more material there to push the wheel out further.
 
You must log in or register to reply here.
Back
Top