Vossen CV4 + AP Racing BBK

cheste1 said:
Have 'em paint your lugs when in for the door handles, sick setup!
Click to expand...

I hoped to have the handles painted this past weekend (as well as install the Morimoto XB angel eyes), but it didn't work out.
I didn't even pay attention to the lugs. Oh well, I just bought a set of black powder coated lugs to make up for it. Thanks for the recommendation! :good:
 
Nice man, should look sick! I made the same mistake when I ordered my wheels, have to get a set of black lugs for mine, too.
 
I agree with red lug nuts will look sick and match perfect with the bbk.
 
Yeah, this thing is wicked! One of those that every time I see that avatar, I wish mine looked that good :)
 
PEEJ - sent you an email. How much are you sticking out past the fenders in the f/r with that setup on those spacers? Any pics? Also - you don't get any rub at the top of the fender if going over bumps with the H&R lowering kit?
 
I haven't noticed any rub yet. I'll let you know more once I get a few passengers to go along for a ride. The possibility exists with extra passenger weight.

The fronts are flush with the body, there's a slight bit of tire showing on the rear, but nothing a 15mm spacer won't fix right up. Running 20mm in the rear.
 
PEEJ said:
I haven't noticed any rub yet. I'll let you know more once I get a few passengers to go along for a ride. The possibility exists with extra passenger weight.

The fronts are flush with the body, there's a slight bit of tire showing on the rear, but nothing a 15mm spacer won't fix right up. Running 20mm in the rear.
Click to expand...

how did you paint the chrome door trim?


Sent from my iPhone
 
How many people have you sent to the E.R. for breaking their necks? Looks sick man. Not a fan of Vossen thats only because i work for Niche.
 
Thanks John.

I was going to go with the Niche T01 Touring wheels, but once I did a bit more research I found out that the 22x10.5 wheels had practically zero concave. Check out the Niche cross section diagrams to see what I'm talking about. I was pretty bummed.
 
thomps66 said:
How many people have you sent to the E.R. for breaking their necks? Looks sick man. Not a fan of Vossen thats only because i work for Niche.
Click to expand...

work for niche??? hook me up with some niche circuit 22x10.5 lol


Sent from my iPhone
 
FXMonkey, if there were any out there I would do my best.

---------- Post added at 08:18 AM ---------- Previous post was at 08:14 AM ----------
PEEJ said:
Thanks John.

I was going to go with the Niche T01 Touring wheels, but once I did a bit more research I found out that the 22x10.5 wheels had practically zero concave. Check out the Niche cross section diagrams to see what I'm talking about. I was pretty bummed.
Click to expand...

One thing that a lot of people do not understand are the forging profiles. The great thing about Niche is that they can build any of their montec wheels in a 2 piece or 3 piece wheel as well. For example if you were to take the T01 and have it built as a 3 piece wheel with a concave center and step lip it would have alot more concave to it than anything you can buy off the shelf. You made a good choice for your wallet and your FX. It looks great.
 
You must log in or register to reply here.
Back
Top