Trailer hitch and bike rack

salts001

Member
Car
2010 FX35 AWD
Finally, I got the Curt trailer hitch mounted and ready for the bike rack. It would have been an easy install but I guess the previous owner had used the tie-down hooks as toe hooks because the bracket was bent about 35 degrees toward the passenger side causing the four bolt holes to be twisted and miss aligned. It was a struggle to straighten them out. I installed 2 bolts at a time to pull and straighten the frame/area, it was painful! I got 9 of the main points out of the 11 bolts up. Its rock solid so I'm not worried. Unfortunately, I did not take any pictures of the mangled area...I was just trying to get the hitch up and over with but here is the finished product.

hitch
IMAG1714.jpg

IMAG1715.jpg

Yakima Ridgeback 4 - great rack system
IMAG1716.jpg

IMAG1717.jpg

IMAG1718.jpg

IMAG1719.jpg
 

Attachments

  • IMAG1714.jpg
    IMAG1714.jpg
    134.9 KB · Views: 457
  • IMAG1714.jpg
    IMAG1714.jpg
    134.9 KB · Views: 206
  • IMAG1715.jpg
    IMAG1715.jpg
    120.9 KB · Views: 260
  • IMAG1714.jpg
    IMAG1714.jpg
    134.9 KB · Views: 178
  • IMAG1715.jpg
    IMAG1715.jpg
    124.3 KB · Views: 187
  • IMAG1716.jpg
    IMAG1716.jpg
    201.3 KB · Views: 1,001
  • IMAG1716.jpg
    IMAG1716.jpg
    197.9 KB · Views: 195
  • IMAG1716.jpg
    IMAG1716.jpg
    197.9 KB · Views: 237
  • IMAG1714.jpg
    IMAG1714.jpg
    134.9 KB · Views: 222
  • IMAG1715.jpg
    IMAG1715.jpg
    120.9 KB · Views: 201
  • IMAG1715.jpg
    IMAG1715.jpg
    120.9 KB · Views: 228
  • IMAG1717.jpg
    IMAG1717.jpg
    203.3 KB · Views: 191
  • IMAG1717.jpg
    IMAG1717.jpg
    203.3 KB · Views: 232
  • IMAG1716.jpg
    IMAG1716.jpg
    201.3 KB · Views: 218
  • IMAG1717.jpg
    IMAG1717.jpg
    203.3 KB · Views: 190
  • IMAG1717.jpg
    IMAG1717.jpg
    203.3 KB · Views: 212
  • IMAG1718.jpg
    IMAG1718.jpg
    238.1 KB · Views: 181
  • IMAG1718.jpg
    IMAG1718.jpg
    238.1 KB · Views: 169
  • IMAG1718.jpg
    IMAG1718.jpg
    238.1 KB · Views: 179
  • IMAG1718.jpg
    IMAG1718.jpg
    238.1 KB · Views: 229
  • IMAG1719.jpg
    IMAG1719.jpg
    171.5 KB · Views: 223
  • IMAG1719.jpg
    IMAG1719.jpg
    171.5 KB · Views: 213
  • IMAG1719.jpg
    IMAG1719.jpg
    171.5 KB · Views: 210
  • IMAG1719.jpg
    IMAG1719.jpg
    171.5 KB · Views: 198
I'm currently researching hitches for use with a bike rack and cargo rack. I have a 2009 rear-wheel drive and am wondering whether using a hitch for bikes like you are will have any negative effects on a rear wheel drive. I read on another forum/post that towing bikes/cargo will make the rear sag/dip lower. Thats a given, but is that a bad thing?

c045439991a10d293a28caede628e8f2.jpg
Sent from my VS987
 

Attachments

  • c045439991a10d293a28caede628e8f2.jpg
    c045439991a10d293a28caede628e8f2.jpg
    24.8 KB · Views: 148
  • c045439991a10d293a28caede628e8f2.jpg
    c045439991a10d293a28caede628e8f2.jpg
    24.8 KB · Views: 172
  • c045439991a10d293a28caede628e8f2.jpg
    c045439991a10d293a28caede628e8f2.jpg
    38.1 KB · Views: 114
  • c045439991a10d293a28caede628e8f2.jpg
    c045439991a10d293a28caede628e8f2.jpg
    24.8 KB · Views: 134
  • c045439991a10d293a28caede628e8f2.jpg
    c045439991a10d293a28caede628e8f2.jpg
    39.7 KB · Views: 124
Last edited:
Does anyone know if I can install a hidden hitch for my FX50 with Ark exhaust? I'm not sure if the hitch will fit because of the new low hanging mufflers. anyone has any experience? I'm looking for a class III hitch to haul a small trailer for my motorcycle.
 
Back
Top