Some photos of my ride

Rear bumper lights, how i've installed them:

First of all i removed the stock

i-279.jpg

i-280.jpg

then made a hole for the wire and screwed them

i-278.jpg

unfortunately I forgot the name of this box. It is responsible for lights, rather a stop signal and marker lights. You must connect to wires that come to her, that is before, not after. Otherwise lights will not work.
Also under this box shows the hole through which I stretched the wire, as if I removed the wire from the tow bar and instead paved the wires from the bumper lights

i-275.jpg


That connector that connects to the wire.do not pay attention to the color of the wires connected to the connector , because the wires from the lights is shorter and they had to be lengthened

i-277.jpg

That connector is already connected and wires are connected to it

i-276.jpg

Sorry for the quality, photos are made by my iphone 3g.
the last photo is blurred.
i-274.jpg

And night photos:

88cd8d400fa4e872-main.jpg


88cd8d406e5444f8-main.jpg


As stop signal

88cd8d40bab96ec3-main.jpg


88cd8d4116312f2b-main.jpg

I made the picture of subwoofer (stealth)

i-283.jpg

i-281.jpg


Also i have installed HKS magnetizer

i-282.jpg
 

Attachments

  • i-279.jpg
    i-279.jpg
    43.9 KB · Views: 17
  • i-280.jpg
    i-280.jpg
    37.9 KB · Views: 15
  • i-278.jpg
    i-278.jpg
    41.7 KB · Views: 13
  • i-275.jpg
    i-275.jpg
    51.9 KB · Views: 16
  • i-277.jpg
    i-277.jpg
    38.5 KB · Views: 15
  • i-276.jpg
    i-276.jpg
    45.8 KB · Views: 18
  • i-274.jpg
    i-274.jpg
    50.1 KB · Views: 11
  • i-283.jpg
    i-283.jpg
    35.8 KB · Views: 15
  • i-281.jpg
    i-281.jpg
    42.9 KB · Views: 12
  • i-282.jpg
    i-282.jpg
    49 KB · Views: 20
Last edited:
I do not feel the difference. A couple of weeks will drive with it and remove it. After it will put on my friends ride (Kia SEED) and see if he will feel the difference
 
9f6f161c4311.jpg

6a9551368263.jpg

6edc95522b13.jpg


f44d1551fdf1.jpg


0703e7667d72.jpg
 

Attachments

  • 9f6f161c4311.jpg
    9f6f161c4311.jpg
    62.7 KB · Views: 11
  • 6a9551368263.jpg
    6a9551368263.jpg
    56.2 KB · Views: 16
  • 0703e7667d72.jpg
    0703e7667d72.jpg
    52.7 KB · Views: 19
from hks: "
10 - 25% on average fuel savings - depending on age of engine
5 - 15% increase in horse power - high octane performance with lower octane fuel
50 - 95% reduction of Carbon Monoxide and Hydrocarbons
83% average reduction of hydrocarbons
Engine runs cleaner and therefore oil lasts longer
Improved performance - quicker starts and faster running
Maintains cooling system efficiency
Stops scale build up and corrosion in your engine
Reduces wear on oxygen sensor and Catalytic Converter
Healthier air and less smog for your community
Suitable for gasoline, diesel, cars and light trucks"

I doubt it really does much....most likely a gimmick
 
I'e recieved black knobs, and have already installed them.

88cd9a9fe9dd22fb-main.jpg


88cd9aa0513e2621-main.jpg


One good man drew to me my car on paper

1
f5a742b5faa9.jpg
 

Attachments

  • f5a742b5faa9.jpg
    f5a742b5faa9.jpg
    106.5 KB · Views: 13
Last edited:
Thank you. it's not the first his picture=)

here another works:
7f6b67d4133e.jpg

He draws by pencil
 

Attachments

  • 7f6b67d4133e.jpg
    7f6b67d4133e.jpg
    154.4 KB · Views: 13
Straight lines and edges are one thing, but to capture the flow and movement of cloth is talent... Very nice.
 
I also make some Plasti dip

before
2a4d64c79efb.jpg

after
c483d88c46a3.jpg

7b1c55bcdc4c.jpg

2a72e25a9f32.jpg

75a954380ce9.jpg
 

Attachments

  • 2a4d64c79efb.jpg
    2a4d64c79efb.jpg
    79.9 KB · Views: 13
  • c483d88c46a3.jpg
    c483d88c46a3.jpg
    64.3 KB · Views: 19
  • 7b1c55bcdc4c.jpg
    7b1c55bcdc4c.jpg
    92.2 KB · Views: 12
  • 2a72e25a9f32.jpg
    2a72e25a9f32.jpg
    71.5 KB · Views: 20
  • 75a954380ce9.jpg
    75a954380ce9.jpg
    80.3 KB · Views: 23
I like how you're always working on your car George.. this time, I like the way you had it before. IMO the texture of the plasti dip contrasts too much with the rest of the car.
 
PMG_705, it was the reason why i desided to Plasti Dip grill and miror covers. I will do in some time cilias and chrome (chrome on the back door, door handle, lower chrome on doors and railings) They are under matte black vinil, which must be upgraded.
 
Back
Top