Sizing 19x10.5 +12

[Thony]

Hey i was wondering how much poke the wheels would have on the first gen FX. Im looking for wheels that has a nicely sized lip and i found some but idk how'd they fit on the FX.

Thanks for help

 

[myron02]

I didn't see anyone run 19s on the FX. But I think those would poke quiet a bit, by 2.5" actually

 

[la_fx35]

Poke by 3mm base on my calculation/experience. I was seating flush on my previous FX35 with 22x10.5 with +45 offset and a 25mm wheel spacer; that puts me at +15 offset.

Check my garage for picture. May not have the right angle to see the stance, but you get an idea.
https://www.infinitiscene.com/search/1/?q=13289-Black-n-Chrome-2003-Infiniti-FX35-AWD

 

[myron02]

Oops, I worded my previous post wrong. As ls_fx35 is right, they will only stick out a small amount. I previously meant that they would be out 2.5" more than stock

 

[shadow191]

That offset will poke some depending on your ride height and camber. I run 20x10.5" +5 in front and +0 in rear.

Note how much +0 sticks out when the car is lifted.


But it only pokes a little bit at ride height. This is +0 and -2.8 camber.


I think your bigger problem is that you want to run a 19" wheel with a lip. That is going to look tiny on your FX. Also keep in mind that 19" tires are much harder to find than an 18" or 20" or 22" especially for the FX since your sizes will not be normal car sizes.

 

[Thony]

yeah i do want to run it with a lip and yeah i do think its going to look tiny aswell, but i just wanted some info before i do anything.