Shock sensor installation question

[WiND DANCE]

Hey guys,

For those that have installed a DEI 504 shock sensor or have some knowledge on electrical.. I've tried to follow this diagram off
of the ORG and can't figure out the where WIRE C goes to. Plus what size fuse I should look into?
From other car platforms the blue wire would trigger the hood sensor to trip the factory alarm... I thought that was the purpose..
Any suggestions??

diagram:
http://www.infinitifx.org/attachment.php?attachmentid=8850&d=1180457232

 

[WiND DANCE]

Never mind, got it to work.

New questions:
-How do I disable the HIDs from flashing when tripped, I feel like it's going to wear out the bulbs and ballast..

-Would one be able to add a piezo siren to the factory alarm?
Since our factory alarm is tied to the horn, if I splice into the horn it'll sound if I honk as well...
Unless there is another
way..
For ex: DEI 513T

 

[WiND DANCE]

No one?

 

[JerzeyFX]

I had my alarm professionally installed, but the way it is set up the OEM horn only goes off if the car is opened manually. So there is definitely a way to splice and separate. I just have no clue how. Lol. Sorry. Ill ask my installer about it.

---------- Post added at 02:31 AM ---------- Previous post was at 02:29 AM ----------

*\ locked and opened manually using the key**

---------- Post added at 02:36 AM ---------- Previous post was at 02:31 AM ----------

Just re-read your post..There is a way to have them both sound at the same time but it is very funky. Only reason I know is because my gfs father's pathfinder has both alarms engaged. So aftermarket and OEM sound at the same time. Im not a fan of the sound.

---------- Post added at 02:40 AM ---------- Previous post was at 02:36 AM ----------

Also my HIDs do not flash but I have a compustar system. So it is probably a completely different set up.

 

[WiND DANCE]

Yea, I think all aftermarket alarms signal the turn signals to flash. For some reason oem flashes the HIDs