ScanGauge II

Status
Not open for further replies.
fxlr8

fxlr8

Staff
Administrator
http://www.scangauge.com/

homehdr_2a.jpg

This is a pretty good tool for anybody that mods cars or just wants to keep stats on their car. Just throwing this out if you are looking for a scan tool.

Features:
TRIP COMPUTER Automatically tracks four sets of trip data - Each with 11 individually stored parameters.
  • Maximum Speed
  • Average Speed
  • Maximum Coolant Temperature
  • Maximum RPM
  • Driving Time
  • Driving Distance
  • Fuel Used
  • Trip Fuel Economy
  • Distance to Empty
  • Time to Empty
  • Fuel to Empty
DIGITAL GAUGESDisplay 4 gauges at a time from the 12 built-in digital gauges. the information is presented in Real-time!
  • Fuel Economy
  • Fuel Rate
  • Battery Voltage
  • Coolant Temperature
  • Intake Air Temperature
  • Engine Speed (RPM)
  • Vehicle speed (MPH)
  • Manifold Pressure (not available on some vehicles)
  • Engine Load
  • Throttle Position
  • Ignition Timing
  • Open/Closed Loop
SCAN TOOL The ScanGaugeII allows you to troubleshoot your own car, read error codes, and the conditions present when the error occurred. You can also turn off the “Check Engine” light and avoid those costly trips to the mechanic.
  • Reads Trouble Codes
  • Reads conditions that set the Trouble Code
  • Clears Trouble Codes
  • Turns off the "Check Engine" light
  • Tells you when vehicle is "Ready" to pass OBDII testing
  • Make and store up to 10 rewritable special codes
    to send to the vehicle computer
Click to expand...

Also with the new xgauge feature you can have additional gauges on it... like horsepower, trans temp..etc. http://www.scangauge.com/support/xgauge.shtml


I bought mine cheaper on ebay.
 

Attachments

  • homehdr_2a.jpg
    homehdr_2a.jpg
    14.9 KB · Views: 36
  • homehdr_2a.jpg
    homehdr_2a.jpg
    14.9 KB · Views: 29
  • homehdr_2a.jpg
    homehdr_2a.jpg
    14.9 KB · Views: 47
Turns off the check engine light. What does that mean? It can block a code or something?
 
Gimmie more indepth review?

What sensors have you tried?
Are there any sensors that don't work?
Picture?
Where do you have it mounted?
Would you buy it again?
 
Sorry Viet, I wish I could give a more in-depth review but can't.

I only used it to clear a couple codes before I got my cipher. But I do use it on both cars.

I need to hook it up and play around with all the features.. like the horsepower gauge. I am pretty sure most of the features will work as long as it can get the read out from the OBDII port, except for things like manifold pressure and other sensors we don't have on our cars.
 
Can you check to see which of these work?

» Fuel Economy » Fuel Rate » Battery Voltage » Coolant Temperature » Intake Air Temperature » Engine Speed (RPM) » Vehicle speed (MPH and KM/H) » Manifold Pressure
(not available on some vehicles) » Engine Load » Throttle Position » Ignition Timing » Open/Closed Loop
 
Cool, I found it earlier. So the miles to empty is a guestimate based on info you input to the scan gauge vs info it is taking out of the OBD-II port.

I'll probably pick one up, running out of places to put things though. lol
 
Status
Not open for further replies.
Back
Top