ROTORPROS REVIEW Infiniti FX45

If I swap the front with either 370z or fx50s akebono calipers, what about the brake lines? Right now I have SS lines installed to the stock calipers. Will they work or will I need different ones? Also, are the 370 rotors a direct fit? And last, do the akebono calipers stick out farther to the wheels than the stock ones? I have spacers and want to make sure I have enough room before pulling the plug. Any or all help would be greatly appreciated, thanks in advance!
 
I run SS lines made for the 1st gen FX35, they work fine. You just need a shorter banjo bolt, StopTech makes them. You may also need to grind down the shorter banjo bolt, I did.

The front 370Z/G37/FX50 calipers and rotors are interchangeable. Just make sure you get the correct rotors for Akebonos as the G/Z have base models with different brakes. Rotors are a direct bolt on, no mods needed. Yes, the Akebono calipers stick out a lot more than OEM calipers. They actually stick out more than most BBK kits. If you already have spacers, you should be fine.
 
You must log in or register to reply here.
Back
Top