Removing Rails, need cap info

payyourtoll

Member
Location
Tampa
Name
Rob
Infiniti of Tampa does not have the caps that need to cover the holes left once roof rails are removed.

I searched and couldn't find it, can someone please tell me what the correct part # is to order

thanks
 
What color is you car
73882-CG004 --KH3
let me know your color code and I will get u the number you need or just take them the number for black ones and they should be able to get you the ones you need
 
Do you the part number for the white caps when you remove roof rails

Hi,

Wassup man do you know the part number for the pearl white roof hole covers for when you remove the roof rails? you can contact me here or you can just email me at ksacollections @ gmail.com get a faster response i ordered them want to make sure their correct.
 
Hi,

Wassup man do you know the part number for the pearl white roof hole covers for when you remove the roof rails? you can contact me here or you can just email me at ksacollections @ gmail.com get a faster response i ordered them want to make sure their correct.

73882-CG006 = QX1 White..I dont know if there was more than one white offered for the FX so make sure thats your paint code
 
thanks jeffereson now as far as cutting these studs, after removal of rail stud will be sticking out of a black plastic piece,can just cut the stud up to the black plastic and place cover becuase i dont want to take off roof liner.
 
Yes you can cut the studs and then pop on the caps but if you want to put the rails back on you will need to drop the liner and replace the brackets.
 
Do you know how to drop the roof liner or have pictures where to start? they have been passing out that black and white picture but if anyone has more detailed pictures of actually doing it please post them thank you.
 
cant reach back roof rail bolts from underneath headliner

im in the process of doing the rail less look i am not going to cut the bolts becuase i can reach the bolts underneath the roof liner in the front thru the sunroof but i took a look at the back they look like they are covered by sheet metal this is just pulling on the middle roof panel the hatch piece, any advice i will try n send pictures soon.
 
Back
Top