REAR Tail/Stop/Fog + Turn LED conversion

No mods for lights' body. No resistors, no hyperflash.

Result (color match 100%):
[video=youtube;02MLXWhYlRM]https://www.youtube.com/watch?v=02MLXWhYlRM[/video]

Bulbs (this is my own project):
ceaeb6cs-960.jpg

And a bonus. rear fog mode (the same bulbs on G):

b2c06acs-960.jpg

And rear ligths (as senn on video):
47aa6ccs-960.jpg
 

Attachments

  • ceaeb6cs-960.jpg
    ceaeb6cs-960.jpg
    116.5 KB · Views: 21
  • ceaeb6cs-960.jpg
    ceaeb6cs-960.jpg
    116.5 KB · Views: 23
  • b2c06acs-960.jpg
    b2c06acs-960.jpg
    33.5 KB · Views: 33
  • b2c06acs-960.jpg
    b2c06acs-960.jpg
    33.5 KB · Views: 35
  • 47aa6ccs-960.jpg
    47aa6ccs-960.jpg
    104.9 KB · Views: 27
  • 47aa6ccs-960.jpg
    47aa6ccs-960.jpg
    104.9 KB · Views: 65
Last edited:
Most of them are as long as they have built in resistors to prevent hyperflash
 
They do NOT have built in resistors.
And they DO work fine without them.
They are not completely plug and play as you have to connect wires.
You do not have to modify taillight in any way.

Отправлено с моего SM-G900F через
 
Well im reffering to most of the application related led bulbs like the vleds set of dtrl i got from vleds.com. Most led running/brake light is plug & play as long as you get the correct bulb application. And to prevent hyperflash you deffinitely need resistors. Your set up looks great tho :good:
 
I have 2 sets of Vleds Triton.
I have bought them almost 3 years ago.

My lamps have ~14Watts of amber while Tritons have only 6.

So it is not "like to like" comparison :))

Отправлено с моего SM-G900F через
 
Sergey do you have a link to where to order those bulbs and parts needed for the install?? Also is there an option to order the bulbs so it can flash red instead of amber? Thanks for the help
 
Back
Top