P1283 and p1273 help

guys, any of you have encounter the headache of this codes, first was appering the p1273, now couple of weeks later p1283, is refering to oxygen sensor bench one and two.

-i have inspect for air leaks,
-harness continuity between ecm/ each sensor plug
-voltage line
-exhaust leak
-also i do change both sensor.
-i did the O2 learning with CONSULT II.



and the fucking codes continues. any of you guys has confront this problem and solve it?



let me know.
 
I did a search around Infinitihelp and the only things I could find are possible fuel pressure problem or fouled injectors. Here's a little info on the codes:

http://www.infinitihelp.com/diy/obd_codes/p1273.htm

and the same thing for bank 2

http://www.infinitihelp.com/diy/obd_codes/p1283.htm

this thread for a G solved the problem but it was just a matter of running some injector cleaner (STP)

http://x.infinitihelp.com/forum/showthread.php/mil-p1283-please-advise-5292.html?highlight=P1283

And I think you probably already have this but the engine control service manual is available here:

http://x.infinitihelp.com/forum/local_links.php?catid=42
 
P1273 came up on my dash too. This is o2 sensor 1 on exhaust manifold correct.I found a hole on my muffler I don't think this will have anything to do with it. Also before it was giving me a code saying bank 2 sensor 2 was no good. Put 800 miles never came back on but this code p1273. What's wrong is it my o2 sensor
 
Last edited:
I'm going to do it myself but only if it's the one on the cat if it's on the exhaust manifold no way I can do it it's so tight. But want to confirm if I patch up the hole on my muffler will the code go away or not since it's past the cats one more thing is upstream on the exhaust manifold or on the cat
 
Last edited:
Back
Top