OK I jinxed my self, so we are even Will.
Here is the situation. I have the Compustar CM3000 w/2way lcd remote/pager. This alarm has not ever given me any problems until now. The auto starter is not functioning properly. Meaning when I try to remote start it, the FX cranks over and cycles 3 times as it should if it doesn't start. So no problem there, in since of the word. So I've been trying to eliminate the problem by checking all the connections, they all seem good.
The good thing is when I insert the key into the ignition, and activate the starter by remote it works. so in one way I think I may have solved my issue. but that will be determined by looking at the key transponder module to see if it needs adjusting. if that is not the case then I'll have have the Brain of the unit looked at, that would be beyond my scope.
Secondly just messing with the remote I've deleted my locking feature once the ride is running, and unlocking once off. I did have the key pad combination to program the remote and factory features, but can no longer find the paper work. I've searched the12volts and can't locate anything there either. checked compustar.com, customer and dealer support and nothing. Must be looking in the wrong places. So if anyone has the know of how to reprogram the remote features, can you please pass them on to me. I've initialized the remote to work but there are certain sequences to regain features wanted or deleted. anybody got tips for me. Thanks in advance
Here is the situation. I have the Compustar CM3000 w/2way lcd remote/pager. This alarm has not ever given me any problems until now. The auto starter is not functioning properly. Meaning when I try to remote start it, the FX cranks over and cycles 3 times as it should if it doesn't start. So no problem there, in since of the word. So I've been trying to eliminate the problem by checking all the connections, they all seem good.
The good thing is when I insert the key into the ignition, and activate the starter by remote it works. so in one way I think I may have solved my issue. but that will be determined by looking at the key transponder module to see if it needs adjusting. if that is not the case then I'll have have the Brain of the unit looked at, that would be beyond my scope.
Secondly just messing with the remote I've deleted my locking feature once the ride is running, and unlocking once off. I did have the key pad combination to program the remote and factory features, but can no longer find the paper work. I've searched the12volts and can't locate anything there either. checked compustar.com, customer and dealer support and nothing. Must be looking in the wrong places. So if anyone has the know of how to reprogram the remote features, can you please pass them on to me. I've initialized the remote to work but there are certain sequences to regain features wanted or deleted. anybody got tips for me. Thanks in advance