New FUJITA RAM INTAKE

P

Panzer74

Member
Location
El Paso TX.
Look what I got in the mail today:smug:
IMG_4085.jpg
IMG_4086.jpg
IMG_4088.jpg
IMG_4087.jpg
BEFORE
IMG_4089.jpg
THE MAF
IMG_4091.jpg
AFTER
IMG_4092.jpg

Easy install, no issues to speak of. Need to do a ECU reset tomorrow. I'm happy witht he results. Next up is a Wire Harness cover. After that comes the Plenum and wire harness cover being powder coated gloss Black Crome with the bolts in bronze. Same color as the intake. Next week comes the yellow SAMCO hose kit for the FX. Should look good when finished in the next month or so.:wink (2):
 

Attachments

  • IMG_4085.jpg
    IMG_4085.jpg
    53.4 KB · Views: 16
  • IMG_4086.jpg
    IMG_4086.jpg
    60.5 KB · Views: 16
  • IMG_4092.jpg
    IMG_4092.jpg
    93.3 KB · Views: 19
  • IMG_4091.jpg
    IMG_4091.jpg
    53.2 KB · Views: 17
  • IMG_4089.jpg
    IMG_4089.jpg
    94.3 KB · Views: 22
  • IMG_4087.jpg
    IMG_4087.jpg
    58 KB · Views: 10
  • IMG_4088.jpg
    IMG_4088.jpg
    70.3 KB · Views: 20
Last edited:
i might sound dumb for asking this but when i searched the part number you listed it comes up for g35 but not for the FX. S i'm wondering will it work fine for the FX?
 
I had no problems with the install. Everything went together fine with no clearance issues. Here is a picture of the box with the part #

IMG_4093.jpg
 

Attachments

  • IMG_4093.jpg
    IMG_4093.jpg
    41.4 KB · Views: 15
That filter element will never look as good again. Nice intake! Up to you but I think you could lose the airflow director at the top of the radiator. I've run the Stillen CAI with and without the ducts - no change in mpgs, sound... don't think they do much once you have an open air filter element.

Agree with the harness cover - get to removing those gangly brackets and plastic zip ties. It's already lookin good - gonna get better...
 
Last edited:
Did it myself, took me about a hour to install. There is alot of OEM intake ducting to take out. Took a little time to Armorall the newly opened up areas. Needed minimum tools to do the job. 2 sockets, screwdriver, pliers. Yes jumbo I took out the duct that is in front of the engine. It just looks funny with nothing in that space. Next week comes my orange Samco hoses for the cooling along with a RARE JDM Hire harness. Last night I painted my coolant reservoir gloss yellow. When the cover gets here the Plenum and wire cover both get powder coated gloss black chrome. The bolts will be yellow or bronze, still debating that part.:sluggish:
 
Last edited:
tempo88 said:
Did you install it yourself? Or pay some guy to do it?
Click to expand...

you can deff do it yourself... extremely easy
Panzer74 said:
Did it myself, took me about a hour to install. There is alot of OEM intake ducting to take out. Took a little time to Armorall the newly opened up areas. Needed minimum tools to do the job. 2 sockets, screwdriver, pliers. Yes jumbo I took out the duct that is in front of the engine. It just looks funny with nothing in that space. Next week comes my orange Samco hoses for the cooling along with a RARE JDM Hire harness. Last night I painted my coolant reservoir gloss yellow. When the cover gets here the Plenum and wire cover both get powder coated gloss black chrome. The blots will be yellow or bronze, still debating that part.:sluggish:
Click to expand...

well done..an hour seems a bit much though
 
You must log in or register to reply here.
Back
Top