Cakeboss107
Member
Need help wat is the fix for po605
need help po605 reads only memory
- Thread starter Cakeboss107
- Start date
- Location
- Westchester, New York
- Car
- 09 FX50
p0605 is the ECM throwing a code.
Engine Control Module (ECM) may be faulty
- ECM harness power supply circuit is open or shorted
- ECM harness ground circuit is open or shorted
Try resetting the code with the code reader. If that foesnt work you will probably just need to buy a new one and replace it.
if you are more handy, you can try testing the power to and from the ECM and stuff like that...
Engine Control Module (ECM) may be faulty
- ECM harness power supply circuit is open or shorted
- ECM harness ground circuit is open or shorted
Try resetting the code with the code reader. If that foesnt work you will probably just need to buy a new one and replace it.
if you are more handy, you can try testing the power to and from the ECM and stuff like that...
Cakeboss107
Member
Ok so if i buy a new ecu is it plug & play or is there something else that needs to be done
---------- Post added at 03:31 PM ---------- Previous post was at 03:31 PM ----------
Where is the ecu ground located?
---------- Post added at 03:31 PM ---------- Previous post was at 03:31 PM ----------
Where is the ecu ground located?
- Location
- Westchester, New York
- Car
- 09 FX50
i think if you find one with the same options on it then it should be plug and play.
not sure about the ground
not sure about the ground