Lerry@ARKperformance
Member
Just as a friendly reminder, my FX35 is just like any other FX35. Theres no such thing as an FX35S, I just put the badge there for fun :smile (2):
I've had the FX35 for over a year now and the mods are slowly building up. I want to share what I've done and I'd like to get some input on the future direction of the FX. So here are the pictures!
July 14, 2009, when i first took delivery of the car and filled up my baby with its first tank of gas from Shell, for some reason I only put Shell in my car, might be the influence from the Ducati.
This is right before I got the front lip for the car, the first major mod I've done. This was way back when it was almost impossible to find a front lip, now I'm stuck with two.
After the lip installation...
Now its time for the front tint and 3M guards at the door handles. First tint place I've seen yet with a computer that cuts the film perfectly...
My next major mod was the video hack. I copied this from the G's before the DIY came out here and it happened to work...now its time to watch videos even when the cars moving
The first meet I went to and met the wonderful crew of InfinitiScene.com in person was the Stillen Open House, can't believe this was that long ago already
Thanks to Gordon and Invidia, the first production Invidia exhaust system for us 2nd gens and a dyno!
After much debate about wheels, I finally decided to get the GTRs. I have to thank sepan for helping me pull the trigger on these
And for those who were wondering if GTR wheels AND huge tires don't fit in our small FX's trunk space, it does :err:
Before on stock 18"
After on GTRs
After the GTRs came the infamous lug nuts that had to go with it. I got both the Volks Formula hexagon nuts and project kics r40s. I couldnt decide which ones I wanted so i just decided to put one set on the left and another set on the right
My friend decided to find me a set of window visors that I've never seen before...the packaging said it was for the FX35/45 so I was sketched out but it seemed to work perfectly fine
The lip left this very ugly gap in between where lower grille and black portion where the fog lights were and it bugged me so I painted the bottom portion to make it look a little better...(theres a hideaway front license plate in the grille, I can take pictures of that if you guys want =])
I was wondering if I should just take the other lip I have and mold it to another bumper and rework the front bumper a bit to custom, but I'm kind of scared what it will turn out like. What do you guys think?
I've had the FX35 for over a year now and the mods are slowly building up. I want to share what I've done and I'd like to get some input on the future direction of the FX. So here are the pictures!
July 14, 2009, when i first took delivery of the car and filled up my baby with its first tank of gas from Shell, for some reason I only put Shell in my car, might be the influence from the Ducati.
This is right before I got the front lip for the car, the first major mod I've done. This was way back when it was almost impossible to find a front lip, now I'm stuck with two.
After the lip installation...
Now its time for the front tint and 3M guards at the door handles. First tint place I've seen yet with a computer that cuts the film perfectly...
My next major mod was the video hack. I copied this from the G's before the DIY came out here and it happened to work...now its time to watch videos even when the cars moving
The first meet I went to and met the wonderful crew of InfinitiScene.com in person was the Stillen Open House, can't believe this was that long ago already
Thanks to Gordon and Invidia, the first production Invidia exhaust system for us 2nd gens and a dyno!
After much debate about wheels, I finally decided to get the GTRs. I have to thank sepan for helping me pull the trigger on these
And for those who were wondering if GTR wheels AND huge tires don't fit in our small FX's trunk space, it does :err:
Before on stock 18"
After on GTRs
After the GTRs came the infamous lug nuts that had to go with it. I got both the Volks Formula hexagon nuts and project kics r40s. I couldnt decide which ones I wanted so i just decided to put one set on the left and another set on the right
My friend decided to find me a set of window visors that I've never seen before...the packaging said it was for the FX35/45 so I was sketched out but it seemed to work perfectly fine
The lip left this very ugly gap in between where lower grille and black portion where the fog lights were and it bugged me so I painted the bottom portion to make it look a little better...(theres a hideaway front license plate in the grille, I can take pictures of that if you guys want =])
I was wondering if I should just take the other lip I have and mold it to another bumper and rework the front bumper a bit to custom, but I'm kind of scared what it will turn out like. What do you guys think?
Attachments
-
3720199742_0bcc04d4a2_o.jpg -
3720199742_0bcc04d4a2_o.jpg -
3837904451_24050242cf_o.jpg -
3837904451_24050242cf_o.jpg -
3837917147_b0b12448c3_o.jpg -
3837917147_b0b12448c3_o.jpg -
3856181955_7f1a2a64d5_o.jpg -
3856181955_7f1a2a64d5_o.jpg -
4176452386_d552632349_o.jpg -
4176452386_d552632349_o.jpg -
4176453368_96f64617e0_o.jpg -
4176453368_96f64617e0_o.jpg -
4590079910_be7f694ce9_z.jpg -
4590079910_be7f694ce9_z.jpg -
4642781132_e5ebb6c89e_z.jpg -
4642781132_e5ebb6c89e_z.jpg -
4643162098_93c20ee338_o.jpg -
4643162098_93c20ee338_o.jpg -
4930025927_751cc27fa3_z.jpg -
4930025927_751cc27fa3_z.jpg -
4946918356_1f244af839_z.jpg -
4946918356_1f244af839_z.jpg -
4947275142_4cee87c73a_z.jpg -
4947275142_4cee87c73a_z.jpg -
4946685519_cb322a7a78_z.jpg -
4946685519_cb322a7a78_z.jpg -
5248147837_08cc191dc8_z.jpg -
5248147837_08cc191dc8_z.jpg -
5248147775_6d36bac242_z.jpg -
5248147775_6d36bac242_z.jpg -
5348175763_585bfbb09e_z.jpg -
5348175763_585bfbb09e_z.jpg -
5335007569_9e09504047_b.jpg -
5335007569_9e09504047_b.jpg
Last edited:
