Memory seat stopped working. Fuse location?

T

ThePublisher

Member
Location
NC
My memory seat no longer goes back when the car is shut off or on. Also does nothing when pressed while the car is on. The seat controls still work though. Is there a specific fuse just for the memory part?
I've looked around the site and don't see a fuse list anywhere...

Thanks in advance.
 
Make sure you have the exit convenience setting selected in the menu. If you changed battery or reset the ecu with battery terminals removed than you will have to reset the memory setting on the seat buttons as well as mate them to your ikey.
 
All I did was check some fuses, trying to fix my lack of audio in the fx. After doing that it stopped working. Haven't done anything to the battery.
Is there a fuse guide somewhere? I'm really not looking forward to pulling every single one out again and checking them hoping I see if one is dead.
 
There is a third fuse box (not listed in the manual), which is behind the battery in the engine bay. Just remove the plastic trim that covers the battery and you will see the black fuse box. Check fuses there if you eliminated the ones in the cabin.
 
You mean, your seat never slide back when key off and it slide forward when key on? If so, check the convenient settings through the center console screen. Also, move the seat to some position and set the memory setting. If you're a big guy and your seat is already in the farthest position that it can't move back anymore then there no point in setting it isn't it.
 
la_fx35 said:
You mean, your seat never slide back when key off and it slide forward when key on? If so, check the convenient settings through the center console screen. Also, move the seat to some position and set the memory setting. If you're a big guy and your seat is already in the farthest position that it can't move back anymore then there no point in setting it isn't it.
Click to expand...


I might have hijacked the thread with the wrong info:

1. My seat memory (Set 1 and Set 2) has never worked (me and my wife are 2 diff sizes and would def be beneficial if we could just press a button to our own settings)

2. My seat + steering wheel does automatically move when getting out of the car when I have that selected from the convenience menu.

3. Motors/etc are working on the seat for sure as I hand adjust it every time when me and my wife switch.

Summary: Seat memory buttons on the left of the seat has never worked and would like to fix it.

Thanks!
 
Hi, I'm new here. I have an issue with my seat memory and the in and out of the car.
Since I bought my 2003 fx 35 it never work. I didn't know about the seat memory when I bought it so no quetion asked ...
The option is on for the in and out on the control panel, but does nothing.
no lights on when I press the programing button or the 1 or 2.
the seat are manually moving perfectly, up down etc.

I really want to find the answer, thanks again.
 
My memory buttons also are not working. They used to work until a got my seat track replaced by the dealership. I never had time to go back and get it fixed and now I suspect it has been too long and my warranty has expired. I think there is a connection under the seat somewhere that was never plugged back in but I have not been able to find it. I would love to have functionality again!
 
Any updates on this subject? I just wired my led mirrors and put logo puddle lights in and now my steering wheel or seat doesn't move when getting in and out. I tried the menu and turned it off and back on with no luck. I tried disconnecting the battery and no luck. I didn't mess with any fuses or anything, all I did was tie the signals to the brown/white and green/white wires behind the kick plate and grounded them both to the frame bolt below. As far as th puddle lights, I simply took out the led bulbs already installed and tapped the wires for the new lights. I have checked the fuses and nothing is blown. Please will one of you more fx experienced member offer some help? Thank you in advance.
 
Are your warning buzzers, beeps when door open with key in, beep while hl on when shutting car off etc... On?



TapaTalkin'
 
Yes, everything works as it should except for the memory seat and steering wheel upon entering or exiting the car. I'm driving myself crazy trying to figure this out. The only thing I was thinking is I removed the bulbs from the puddle light and put spade connectors where the bulb would normally be rather than tapping into the wires themselves. The reason I did it this way was in case I ever had to remove the door panel I can simply unplug the logo lights rather than cut and retap the wires. Idk, I know the circuit is complete but maybe not enough draw to make something or other work. IE memory seat settings. Any ideas?
 
That's the thing, it worked fine until I installed led mirrors and puddle lights. I'm confused, someone here has to know what the problem is. Please!

---------- Post added at 05:00 PM ---------- Previous post was at 01:34 PM ----------

Will someone please help here? I've been on the Borg, I've looked at the manual I have reset the memory 2 different ways with not luck. This is driving me insane!
 
I'm experiencing the same problem with my parents '06 FX.

First we noticed that the power outlet (dunno what its called but its where you plug in car chargers) stopped working on the front. a few weeks later the charger on the back seats also stopped working. Today the memory seats wouldn't work but the seat does still move backwards when the car is off and all seat mechanism work. (setting selected for it to move backwards for easy exit). Not sure if its all related somehow but hoping its just a fuse I can change.
 
The seats move automatically when exiting but don't function by pressing the button? If so, I don't see how this could be a fuse. Could be the controls themselves.



TapaTalkin'
 
Mine do not move automatically when entering or exiting the car, even though the option is on in the system settings. Also, I cannot set a seat memory. I can adjust the seats, steering wheel and everything else. But cannot save in memory or get them to auto adjust when entering or exiting the vehicle. My dome lights work, the chimes, the HL on chimes etc, etc. please help!
 
You must log in or register to reply here.
Back
Top