LED interior 12 piece deal

KrautoParts said:
Im not sure why kit was sold to you in a first place since i was working only on gen1 FX35 but i took care of the issue over emails with you and got proper bulbs out to you

Jeff
Package came in today according to tracking :)

Enjoy
Click to expand...

Correct, bulbs have arrived and are installed. I posted pics in my garage, very happy with them so far. I have the complete interior kit and license plate bulbs. Thanks for the follow up.
 
finally received the package yesterday and I immediately started installing it. my opinion, it ain't the brightest but it's good enough for my intended use. I didn't want the overwhelming Aquarium/Operating Room type of lighting in my interior but wanted a bright & good quality lighting to be available when I needed one. my solution, a combination of 12pc 40+ bucks eBay LED's & VLeds High Output bulbs for the dome & passenger light. a total expenses of under $100.-


-The Mascot Assassin
 
Ramsey said:
finally received the package yesterday and I immediately started installing it. my opinion, it ain't the brightest bhIut it's good enough for my intended use. I didn't want the overwhelming Aquarium/Operating Room type of lighting in my interior but wanted a bright & good quality lighting to be available when I needed one. my solution, a combination of 12pc 40+ bucks eBay LED's & VLeds High Output bulbs for the dome & passenger light. a total expenses of under $100.-


-The Mascot Assassin
Click to expand...

Which kit are you refering to? The one I originally posted in this thread?

---------- Post added at 10:26 PM ---------- Previous post was at 12:43 PM ----------

I must have like all the luck. I finally received the bulbs and got shorted 5. Only 7 came in the kit.
 
Did that immediately. I did install the ones that came and I do like the way they look. Changes the whole atmosphere inside the car. A word of advice to anyone changing bulbs. The sockets are very delicate. If it feels like the bulb is not going in right then do NOT try to push it in harder. You will ruin the socket by bending the metal contacts. Get a flashlight and make sure that the angle is just right before you slide it all the way in. Hey RIP quick question for yah...did you put those two little tiny screws back on the two lights in the hatch?
 
Heres the before and after side by side from this kit.
IMAG0653.jpg
[/IMG]
 
You must log in or register to reply here.
Back
Top