Is it A. Possible B. Nuts and/ or C. Cheesy to Pull The Rear Fenders on an EX35?

O

OhThatGuy

Member
Car
2017 Q50 Red Sport with MRR M600 wheels
I've got about 1/4" too much poke on my rear wheels and would love a slight flare in the fender to get more tucked look. There is a local guy who has done a lot of G35 rolls/ pulls but I'm not sure if it is doable for the EX or bad to have it done for some reason. Thoughts?
 
I also vote A, It would much nicer, I really don't like any poke.
 
After looking at it, it seems like about 1/2 of my excess poke could be eliminated if I go to 275's instead of the 285's that are shoehorned onto the 9.5" wide wheels. I may throw 275's on all around and see if that cures my itch to get the finders pulled.
 
Would pulling the fenders mess up the plastic trim? Rolling the fenders will give you more clearance, but it won't fix your poke. Are you still stock height? Maybe have some negative camber dialed in to fix the poke. If you're not slammed, pulling the fenders will look cheesy.
 
Thanks for the feedback guys. I'm just going to throw 275/40/20's on and cure some of the poke that way. The taller tires may also eat up some wheel well gap and make the poke less obvious.
 
You must log in or register to reply here.
Back
Top