Interest In a Very Good Quality LED Interior light kit?

Status
Not open for further replies.
i read the 1st post and every post after dat and seems like other bulbs keep getting included.. dats y i asked....
 
Its going to be a complete kit:

Its going to include:

4x F & R Dome 31mm
4x F $ R Doors 31mm
1x Glove box #74-type LED (or T5 base incandescent)
2x License Plate 194 wedge
2x Cargo Trunk 31mm
2x Vanity Mirror 32mm​
 
Last edited:
I received the bulbs today and test fitted them. They seem to be good quality (never seen other manufactures leds so im going by feel and look). Ran into couple situations. The vanity light, license plate, and glove box lights dont fit. will sort this out with koso to make sure right bulbs are provided.

I will do a better review on the bulbs that are installed later on tonight as its too bright out to judge the quality and brightness.
 
Last edited:
Koso Kustomz said:
I would of preferred you to talk to me via PM before talking bad about the products, You NEW this was a FREE kit to you, for TEST FITTING.
Click to expand...

i never said anything bad about them... just updating. a defective bulb happens it was just 1 out of 10. As for the ones that don't fit, Isnt this the whole point of this test fit/ review? Just helping to make sure everything fits and unbiased review. Like i said, i havent tested the output of the lights as its to bright out.
 
The point is for you to test them out, relay the information to us, so we know what fits and what does not fit, that way we can get a complete kit and is 100% fit. Your review would be better to come AFTER you have a kit that fits perfect, not during the testing.

When I test out a prototype for a company, I don't do a review on that. You review the final part.
 
. .
Koso Kustomz said:
The point is for you to test them out, relay the information to us, so we know what fits and what does not fit, that way we can get a complete kit and is 100% fit. Your review would be better to come AFTER you have a kit that fits perfect, not during the testing.

When I test out a prototype for a company, I don't do a review on that. You review the final part.
Click to expand...
 
Hmm... Maybe you should've clearly conveyed the conditions of testing the kit to Viperi... I don't see any wrong doing on Viperi's part.
 
Bet you he would love the fx :P. I do apologize if i approached this the wrong way Koso. Im here to help you and the forum members. I will gladly still help with the slight kinks in the kit to provide fellow Is members a quality kit.

Logan said:
No harm no foul then, just work with Viperi to dial in the kit OR buy an FX as a test mule =)
Click to expand...
 
Everyone knew this was a test fit so I didn't take any of those comments as a dis to the products. Since this is a teach and learn forum, I actually like hearing about the process.
 
So who is the tester for the 2nd gens? Viperi is for the 1st gens, who is the 2nd gens. I know the lights are different so when the 2nd set is finalized I'm sure lots of us 2nd gens will be interested, including myself.
 
Status
Not open for further replies.
Back
Top