Installed Ichiba V2 25mm Wheel Spacers

[COPPERFX]

First off for the price and ease of installation I couldn't be happier. Took about an hour. Anyway here are the pics that show the difference.

Before:


Before #2:


After:


After #2:


Final and My Favorite:


Next this winter...COILOVERS:eek.:

 

[PMG 705]

Looks good!! Now for the question a guy should never ask another guy, any rubbing?

 

[bleedingsujit]

...any rubbing?

i doubt it, even though it looks so close....looks perfect.

 

[Logan]

Looks good!! Now for the question a guy should never ask another guy, any rubbing?

I'd check the IS handbook on this :wub:

 

[AlohaRacing]

Big difference and looks great.

 

[COPPERFX]

No rubbing! Very pleased! Thanks for the props!

 

[Logan]

Does look much, much better, are you flush in the front? Hard to tell in the pics, almost looks like the tire bulge is creeping out past the well.

 

[Dr.2K]

Your gonna love how the FX will handle so much easier on those turns!

 

[la_fx35]

Cooper, looking nice.

 

[jumbosrule]

That is the right stance for the FX. Nice work!

 

[COPPERFX]

Thanks again! Yes its flush in the front...eventually I'll wash and wax once the temp here drops below 104...we've been in a heat wave for weeks.

 

[bubito9512]

hey i wan't to add spacers to my 09 fx35 i just dont know with ones to get my factory wheels are to deep in i want them just right on the corner fender.. can you guys help me out, in the pic they dont look that deep in but they are!

 

[bleedingsujit]

25 mms or 20 mms and get wider tires.

 

[SexualChocolate]

hey i wan't to add spacers to my 09 fx35 i just dont know with ones to get my factory wheels are to deep in i want them just right on the corner fender.. can you guys help me out, in the pic they dont look that deep in but they are!

Measure the gap from the wheel to the inside lip of the fender or to the outside of the fender and that is the spacer you need. It's very simple.
http://www.trakplus.com/measure

 

[Dr.Ford]

I recently purchased and installed 25mm Ichiba v2 wheel spacers. Looks amazing! My question- Is it necessary to re-tighten the wheel spacers after driving on them for a bit? The guy at the tire shop who put them on said it's only necessary to re-tighten the wheel lugs, not the inner gold nuts holding the actual wheel spacers onto the hub. Any truth to this??

 

[bleedingsujit]

I was told the same thing. I take the wheel out and check the inners once a month and check the outers every Sunday. Its all safe. You don't really have to tighten everything all the time.