Infiniti FX50s - aka - =*QX70*=- :: 2011 Infiniti FX50s

Overview Discussion
Niceee... If am gonna get aftermarket wheels it would be 22x11.5....cant wait to see how it looks.

Sent from my SM-N900T
 
The wheels look good, nice choice on brushed finish. It shows off the wheel details much better than black would. I have a set of Forged1 wheels in black with a similar design and I'm considering having them stripped and redone in brushed or silver. Don't like the loss of detail.
 
Hi Yerbol,
Awesome looking ride man !!!
Question if I may...you mention you used spacers on the stock 21's. I have an 09 50s, I think the rears steer a bit.
you mentioned using

with Stock 21x9.5:
Ichiba V2 15mm on front
Ichiba V2 25mm on rear

Did you have any issues at all ?



 
teddis said:
Hi Yerbol,
Awesome looking ride man !!!
Question if I may...you mention you used spacers on the stock 21's. I have an 09 50s, I think the rears steer a bit.
you mentioned using

with Stock 21x9.5:
Ichiba V2 15mm on front
Ichiba V2 25mm on rear

Did you have any issues at all ?


Click to expand...
Teddis i think it's your rear alignment. needa go get them check ASAP. It's dangerous and kinda scared during raining day if im right. my preview G35 had that problem whenever it rains i have "fish tails" after i did the alignment the handling it's great. i have 20 mm on my front and rear QX70. rides perfect.

---------- Post added at 10:12 PM ---------- Previous post was at 10:10 PM ----------
Yerbol said:
Yes, there is negative camber in both sides (front & rear) since a car lowered.
Click to expand...

does ur tires wear out a lot faster? damn it looks really sexy with that set up. i just wanna change my tires more frequently to get that look. LOL
 
Hi Eric,
i was. actuality referring to the active rear steering when the Sport mode is engaged on the 50s. I have no drive ability issues.
i am looking to get a better stance on the 50s without looking goofy.....a little wider in the back than the front. What would be a good spacer combo for front and rear ? And safety or handling issues likely ? I have never used spacers before.
thx
 
teddis said:
Hi Eric,
i was. actuality referring to the active rear steering when the Sport mode is engaged on the 50s. I have no drive ability issues.
i am looking to get a better stance on the 50s without looking goofy.....a little wider in the back than the front. What would be a good spacer combo for front and rear ? And safety or handling issues likely ? I have never used spacers before.
thx
Click to expand...

Hi Teddis
sorry for the late reply. Im a big fan of spacers. i had on my previous G35 (get a chance you can go to my albums and look at it) You are right. you don't wanna look goofy but flat with the fenders or maybe just a little bit more. I currently have 20mm on my QX70 front and rear. but the front comes out a little too much. so i would recommend 15mm for front and 20mm in rear. Please keep this in mind. aftermarket rims is a bit wider than OEM rims. if you're going to put on aftermarket wheels. i say hold off on the spacers till you've got the wheels on. that way you don't have to go back and re-order the new set of spacers.
handling wise, if your alignments set up right. then you shouldn't have any problems at all same goes with safeties. hope my info. helps.
 
Hi Eric,
Thanks for the reply. I am sticking with the stockers 21 inch. So, looks like 15 in the front.....cannot decide between 20 and 25 for the rear. Yerbol had 15 and 25's no problem.
Is Ichiba V2's the way to go ? I just want a set I can take to the tire place on winter swap out and hand them over. Is there anything else part wise , or modifications to be made guys?

Thank you.
 
teddis said:
Hi Eric,
Thanks for the reply. I am sticking with the stockers 21 inch. So, looks like 15 in the front.....cannot decide between 20 and 25 for the rear. Yerbol had 15 and 25's no problem.
Is Ichiba V2's the way to go ? I just want a set I can take to the tire place on winter swap out and hand them over. Is there anything else part wise , or modifications to be made guys?

Thank you.
Click to expand...

Teddis
it's up to you if you want to go with 29 or 25. there's another way. you can use your ruler to measure the tires to your fenders. and see how much space you want. then you can finally make your decision on that. and there's no modifications for it. it's the easiest thing and i think it's the first step too. your gonna love the result after you put them on.
 
here is the pix for now. better one will be posted later once I will have a chance to take good shots

_044673ecb8574a3c2cce63d97388bb06.jpg
 
You must log in or register to reply here.
Back
Top