Hyp flash with front LED turn signalH

[SilverStreakFX]

Hi all
i just replaced my front turn signal with LED. Unfortunately I am getting the hyper flash. How do I fix it?

 

[Renhalt]

You need Load equalizers, they are all over ebay or you can pick one up at radio shack. Problem solved.

 

[pmanliu]

Yep Google DIY load resistors and you will find some good hits. Just tap them into your turn signals. One side of the load resistor into each of the turn signal wires (two wires per turn signal) . Be careful about leaving the resistors near other wires as they get really hot.

Here are the parts I used and pics




Sent from my SCH-I510

 

[SilverStreakFX]

Thanks! Do I cut a wire and run this in between or does it just tap in?

 

[pmanliu]

Tap it in. Make sure the wires you use to tap are long enough so you can properly hide the resistors in the engine bay

Sent from my SCH-I510

 

[SilverStreakFX]

Excellent. I know what I am knocking out tomorrow!!