Handy_Andy's Mini Meets

Wow, cheese curbs freshly made as always. :good:
Will pickup the rental Eastwood Fender Roller tool tomorrow night. Fender rolling anyone? :smile (2):
 
I have a Blue Zebra in my garage. Here's a couple pics to start.
DSC08621_S_zps6118d542.jpg

DSC08627_S_zpsbe252a35.jpg

DSC08626_S_zpsa0555257.jpg

DSC08628_S_zpsa1b78f2f.jpg
 

Attachments

  • DSC08621_S_zps6118d542.jpg
    DSC08621_S_zps6118d542.jpg
    157.3 KB · Views: 4
  • DSC08627_S_zpsbe252a35.jpg
    DSC08627_S_zpsbe252a35.jpg
    226.3 KB · Views: 7
  • DSC08627_S_zpsbe252a35.jpg
    DSC08627_S_zpsbe252a35.jpg
    226.3 KB · Views: 3
  • DSC08621_S_zps6118d542.jpg
    DSC08621_S_zps6118d542.jpg
    157.3 KB · Views: 4
  • DSC08626_S_zpsa0555257.jpg
    DSC08626_S_zpsa0555257.jpg
    243.4 KB · Views: 3
  • DSC08626_S_zpsa0555257.jpg
    DSC08626_S_zpsa0555257.jpg
    243.4 KB · Views: 10
  • DSC08628_S_zpsa1b78f2f.jpg
    DSC08628_S_zpsa1b78f2f.jpg
    135.1 KB · Views: 5
  • DSC08628_S_zpsa1b78f2f.jpg
    DSC08628_S_zpsa1b78f2f.jpg
    135.1 KB · Views: 4
Oh how can I left these out!
DSC08637_S_zps656882e6.jpg

Loosen the axle nut with this jumbo socket set.
DSC08632_S_zps6bc9a155.jpg

Piece of cake with this cheater bar!
DSC08633_S_zpsa7540c4e.jpg
 

Attachments

  • DSC08637_S_zps656882e6.jpg
    DSC08637_S_zps656882e6.jpg
    218.2 KB · Views: 5
  • DSC08637_S_zps656882e6.jpg
    DSC08637_S_zps656882e6.jpg
    218.2 KB · Views: 4
  • DSC08632_S_zps6bc9a155.jpg
    DSC08632_S_zps6bc9a155.jpg
    106.6 KB · Views: 5
  • DSC08632_S_zps6bc9a155.jpg
    DSC08632_S_zps6bc9a155.jpg
    106.6 KB · Views: 4
  • DSC08633_S_zpsa7540c4e.jpg
    DSC08633_S_zpsa7540c4e.jpg
    166.8 KB · Views: 4
  • DSC08633_S_zpsa7540c4e.jpg
    DSC08633_S_zpsa7540c4e.jpg
    166.8 KB · Views: 4
Wow, that whole setup will look so good when its done Z. You will not believe how it will transform the look and the drive on the road. Make sure to bring extra cheese curds for this job. :good:
 
Ok, we going to BBQ on Sunday and I believe a pass by a farm on route 30 by Plainflield on the way to pickup the Eastwood Fender rolling tool. :wink (2): I drive out there and see if I can talk to the owner if can get for some "country side" shoots after lunch.
 
Ok, we going to BBQ on Sunday and I believe a pass by a farm on route 30 by Plainflield on the way to pickup the Eastwood Fender rolling tool. :wink (2): I drive out there and see if I can talk to the owner if can get for some "country side" shoots after lunch.
Awesome , we will be looking for the pics :good:
 
Let's do lunch around 11ish... I've got a christening in the afternoon that I was just made aware of.



TapaTalkin'
 
Wow, that whole setup will look so good when its done Z. You will not believe how it will transform the look and the drive on the road. Make sure to bring extra cheese curds for this job. :good:

extra cheese curds for you to eat while you watch Andy work?
 
What 11:00 lunch? Well, the grill is available anytime you guys want to start :smile (2): I know I will be in the garage by 9 am.
 
Wow this is gonna be so sick.
For the longest, everyone has wanted Zebra to get spacers and a drop to compliment the wrap.
 
Back
Top