GTSPEC Mid Chassis Brace FX 35/45 - Install Pics / Pre Production Pics

Status
Not open for further replies.
G

GTSPEC

Member
Just finished today. First batch of 20 pieces are on production now. ETA to be advice. Possible late July to Mid August.

Price @ $359 Per piece / Part # GTS-SUS-1396.

fxmid-043.jpg


fxmid-044.jpg


fxmid-045.jpg
 
Last edited:
Looks nice - Just to confirm this is the mid brace in Rubares feeler thread correct-///6331

Will you be pulling the order from the last posted list and will there be a GB price?
 
Will you be notifying those that are the list that Rubares feeller thread once it ready to be shipped? I'm new to the Group Buy, so snot sure what is the protocol in get it. Thanks
 
looks awesome. Great mounts and great welds.

Thanks for pulling this together.
 
Hope there are no issues with aftermarket y-pipes and AWD FX's and the transfer case.
 
awd will def clear that, most if not all exhausts should too, if it contacts then the exhaust will need to be raised, but it'd have to be hanging pretty low to begin with I think, that looks like it should fit everything really, I hope :)
 
Yes, it probably will but I think it may have been better to just test fit on a AWD just to make sure of no fitment issues.
 
so this works along with ladder brace right? because i thought this new mid chasis brace replaces the 4pt ladder brace but seems like its not.

and hope that all the other shipment arrives mid july so i can install them before i leave us for 3weeks.
 
Dr.2K said:
Hope there are no issues with aftermarket y-pipes and AWD FX's and the transfer case.
Click to expand...

It looks close from the pictures to touching the Y-pipe. I'd have to see a shot from the side to be sure, as pictures can be deceiving.

If you look at my aftermarket Y, the diameter is thicker -- then again I don't have the head shield like the OEM Y, so it *hopefully* is a wash.

I think the Nismo hangs a little lower closer to the mid-pipe due to the weight of the extension, hence the extra hanger typically required. I have a polyurethane hanger for the mid-pipe so no real give there, so my setup should be good (crossing fingers).

DSC01677.jpg
 
Yea, those were basically my concerns. Just something to think about if you plan on getting this brace.
 
turbocad6 said:
awd will def clear that, most if not all exhausts should too, if it contacts then the exhaust will need to be raised, but it'd have to be hanging pretty low to begin with I think, that looks like it should fit everything really, I hope :)
Click to expand...

yeah we think it will clear almost every exhaust out there. IF not, we can supply 5mm to 8 mm spacers since FX has alot of room, should be any problem.

---------- Post added at 10:34 AM ---------- Previous post was at 10:32 AM ----------
minkl81 said:
so this works along with ladder brace right? because i thought this new mid chasis brace replaces the 4pt ladder brace but seems like its not.

and hope that all the other shipment arrives mid july so i can install them before i leave us for 3weeks.
Click to expand...

yes, this brace are in addition to the 4 pts ladder brace. it's more of a "Mid Chassis" reinforcement. The 4 pts ladder brace sit around the front subframe.

---------- Post added at 10:35 AM ---------- Previous post was at 10:34 AM ----------
theMerchant said:
wow the most expensive of the braces :eek.:
Click to expand...

yeah, it's a huge brace .... it's about 45" long and 40" wide.

---------- Post added at 10:38 AM ---------- Previous post was at 10:35 AM ----------
Chedman13 said:
It looks close from the pictures to touching the Y-pipe. I'd have to see a shot from the side to be sure, as pictures can be deceiving.

If you look at my aftermarket Y, the diameter is thicker -- then again I don't have the head shield like the OEM Y, so it *hopefully* is a wash.

I think the Nismo hangs a little lower closer to the mid-pipe due to the weight of the extension, hence the extra hanger typically required. I have a polyurethane hanger for the mid-pipe so no real give there, so my setup should be good (crossing fingers).

DSC01677.jpg
Click to expand...

We will include some spacers for those who have aftermarket Y pipes. As of now, we have about 2" clearance from the OEM Y pipes.

See pic below.

fxmid-048_0.jpg
 
GTSPEC said:
yeah we think it will clear almost every exhaust out there. IF not, we can supply 5mm to 8 mm spacers since FX has alot of room, should be any problem.
Click to expand...

Nice. Yeah, my rear GTSPEC bars are much lower and I've never hit anything on the road -- even with being lowered on H&R's.

Good to know you can provide spacers if needed.

Is there an authorized vendor of GTSPEC products that can do a group buy? Would love to save some money on MSRP:rolleyes:
 
Chedman13 said:
Nice. Yeah, my rear GTSPEC bars are much lower and I've never hit anything on the road -- even with being lowered on H&R's.

Good to know you can provide spacers if needed.

Is there an authorized vendor of GTSPEC products that can do a group buy? Would love to save some money on MSRP:rolleyes:
Click to expand...

+1 on the group buy.
 
FX45Chicago said:
How much for all the Braces made for the FX45?
Click to expand...

contact one of the vendors here, GTSPEC will not sell them to you directly, they are a manufacture/distributer. Keep in mind, they dont normally stock the braces, since they think it is a slow moving (off shelf) item.

///6152
 
Status
Not open for further replies.
Back
Top