Fire0nic3's 2009 Infiniti FX35 Thread (Picture's Inside)

  • Thread starter Thread starter Fire0nic3
  • Start date Start date
Just changed out all 921 LED's in mine, other than cargo and map led's (as those are different and not 921 style). I will post pics when all LED's are installed, which should be by next wknd!
 
Installed Rear LED side markers. Mike came over and installed them for me. Had them wired directly to both tail lights:

photo31xd.jpg
 
I was gunna ask the same cause the only person I can think of that sells this is marek ???


Sent from my iPhone
 
Hey, I'm new to the forum I love the mods u did with the ride. I have a 2012 FX35 so far all I did were tints and led interior lights. Can u give me any advice on the front aero spoiler?? and also have the cops ever stopped u Aaron for the windshield tint. I know they don't particular like vehicles with the front window tint in NYC!!!
 
After weeks of waiting Marek finally decided to send me the rear led reflectors lol. Took forever for him to send them but glade he finally did the right thing.

ARISTOCRAT said:
Hey, I'm new to the forum I love the mods u did with the ride. I have a 2012 FX35 so far all I did were tints and led interior lights. Can u give me any advice on the front aero spoiler?? and also have the cops ever stopped u Aaron for the windshield tint. I know they don't particular like vehicles with the front window tint in NYC!!!
Click to expand...


Thanks and welcome to :iS:

What advice do you want on the aero spoiler? Its easy to install and looks great! If your interested in buying one contact Rick@PerryInfiniti on here. He's a vendor.

Havent been stopped yet but I might get stopped soon. Been stopped for side windows before. Cops here hate window tint lol. I think if you try and not make yourself look too obvious they won't notice. I wouldn't go any darker than 50% on the windshield for safety issues. Hope that helps!
 
Not that easy but also time consuming. Took about 3 hours to do. Had this guy mike from the G forums that knows wiring to install it for me. Had to cut the tail light wiring and tap into the power for it, solder, and heat shrink. Taillights were a pain in the ass to remove. Once the two bolts are removed the tail lights need to be forced out. Clips are really stiff that hold it in. Also had to run the wires and route them up through the bumper.

---------- Post added at 05:13 PM ---------- Previous post was at 05:12 PM ----------

I'm usually a DIY type of guy but I wouldn't ever do something like that myself lol. Anytime there's wire cutting involved I leave it up to someone that knows what their doing.

---------- Post added at 10:20 PM ---------- Previous post was at 05:13 PM ----------

Another night pic from earlier just got back lol:

photo35y.jpg
 
You must log in or register to reply here.
Back
Top