Fire0nic3FX's 2006 Infiniti G35 Sedan Picture Thread

My brother drives an '06 6MT G Sedan. It's a great car, drives very similar to a 1st gen FX (about the same noise level, etc.) Good luck on the retrofit; I saw a few sedans on G35driver with those and it looks like a pretty easy/straightforward install.
 
Sorry or the late reply. Here is a pic I took today:

29E03C1E-247D-4906-B889-3D467C4AD16F-325-0000001ABFC546D6_zps248d052e.jpg


Did a full service on it myself today:

Mobil 1 extended performance oil change
Drain and refill differentials with valvoline 80w 90
drain and refill transfer case with Nissan matic D
cleaned throttle body
Replaced spark plugs


ran into a dilemma now. I cleaned the throttle body and now the idle is all over the place and I treated the butterfly valve when opening it as if it was thin glass. I even disconnected the battery. The car won't accept idle relearn at all!! I'm so pissed I have to take it to the dealer to let then do it with the computer.
 

Attachments

  • 29E03C1E-247D-4906-B889-3D467C4AD16F-325-0000001ABFC546D6_zps248d052e.jpg
    29E03C1E-247D-4906-B889-3D467C4AD16F-325-0000001ABFC546D6_zps248d052e.jpg
    207.6 KB · Views: 14
Here is a pic from the other day cleaning the throttle body. It was filthy!

7ECAAA28-45B2-4F1E-BCE8-FEE269D7722F-589-0000004C9B5EA8BD_zps2f6f8777.jpg

Had to go to the dealer to get the throttle and idle reset. The relearn procedure I was doing would work then once I turn it off it would forget it all over again. Never touching the butterfly valve again! lol

---------- Post Merged at 10:56 AM ---------- Previous Post was at 10:56 AM ----------

They has to use the Consult to get it to work.
 

Attachments

  • 7ECAAA28-45B2-4F1E-BCE8-FEE269D7722F-589-0000004C9B5EA8BD_zps2f6f8777.jpg
    7ECAAA28-45B2-4F1E-BCE8-FEE269D7722F-589-0000004C9B5EA8BD_zps2f6f8777.jpg
    119.5 KB · Views: 10
zebra555 said:
How much did they charge for the relearn procedure?
Click to expand...


Didnt charge me anything because my dad is friends with the master mechanic over there and I know the manager. Only way they got the idle to go back was with Consult. The car wouldnt accept a relearn with the pedal procedure. They also did some other things for free for me. By the way this was at the Nissan dealer. I was going to take it to Infiniti but I can't drive it too far right now because I'm on a spare waiting for my new tires to come.

---------- Post Merged at 04:38 PM ---------- Previous Post was at 04:26 PM ----------

I got to say the look on this is timeless. I wasn't always crazy about G's but they drive and look nice!

95C8C162-B37C-43F1-816D-5C6BF2800690-589-000000754FF0FFB9_zpseb5e83ec.jpg

It's begging for tint and a black obsidian grille :3
 

Attachments

  • 95C8C162-B37C-43F1-816D-5C6BF2800690-589-000000754FF0FFB9_zpseb5e83ec.jpg
    95C8C162-B37C-43F1-816D-5C6BF2800690-589-000000754FF0FFB9_zpseb5e83ec.jpg
    116.8 KB · Views: 10
I wish there was something you could do with those headlights....not a fan of them, but I like the rest.

Looks like not just the TB are dirty! man that's a dirty engine compartment! Did you clean it yet?
 
Yup I have some plans for the headlights. I don't really like them either.

Engine bay has never been cleaned at all and yes the splash pan is there lol.
 
Ive heard the same. I just don't play with headlight housings anymore. I attempted to some foglight projectors on a older maxima. I had to cut up the housing to install long mounting bolts. I just lost interested and at the same time lost a set of fog lights for that car. I dont fabricate much.

This was about 5-6 years ago, before stuff like that morimoto projectors came out and s2k/tsx/TL projectors were going for $250 a pair. Whole new world now.
 
Last edited:
These morimoto projectors have a threaded mounting shaft so it fits right through the previous existing hole on the back of the G35 or any reflector headlight. Basically no cutting needed. I assume the hardest part will be removing the headlight and lens but that should be pretty much straight forward.

---------- Post Merged at 12:27 AM ---------- Previous Post was at 12:26 AM ----------

One thing I like is that I can use this car to experiment with things on I've always wanted to do like this projector retrofit.
 
jdTrader said:
^ I thought you were looking into getting a 1st gen FX?
Click to expand...

The G will stay in the family. My brother has his eyes on it. The FX is on the backburners until then plus gives me a good chance to pay cash for it. Its a lot easier to buy a car when you don't have a car.
 
You must log in or register to reply here.
Back
Top