EXE replica

[sirtrojan]

What do you think about these wheels?
http://cgi.ebay.com/ebaymotors/ws/e...0450091755&ssPageName=ADME:X:eRTM:MOTORS:1123

Should I buy a set? or better wait and get original one?

 

[N2FX]

EXE doesn't offer 22s for 5x114.3

You can buy 5x112 and modify to fit your FX.

Is that price per wheel or per set?

 

[theMerchant]

the offset is a little low, only extends an extra 8mm. you can to look for an offset of ~30mm for a 9 inch rim and ~35mm for 9.5 inch rim (IMO).

Dennis that set is for 4

 

[DarkCyde]

The guy only ships to US and Canada. Otherwise, they look good.
Not to hijack the thread, but besides the weight, what are the other differences of knock off wheels? I've seen some nice replicas.
Is there a federal standard which they meet while the originals exceed those standards?

 

[sirtrojan]

the offset is a little low, only extends an extra 8mm. you can to look for an offset of ~30mm for a 9 inch rim and ~35mm for 9.5 inch rim (IMO).

so with the 20 mm spacer would be OK?

 

[theMerchant]

spacers will be ok, but if you can get a rim w/o the need for spacers it would be best. double check the hub size, you might need a hub centric ring

 

[909FX]

What do you think about these wheels?
http://cgi.ebay.com/ebaymotors/ws/e...0450091755&ssPageName=ADME:X:eRTM:MOTORS:1123

Should I buy a set? or better wait and get original one?

did you end up getting these wheels?

 

[COPPERFX]

They look nice!

 

[PMG 705]

Ebay poster says the rim weighs 34 lbs.....

 

["LittleGagne"]

Ebay poster says the rim weighs 34 lbs.....

For 22's?! Dang lol


Sent from my iPhone