Cut/Shave Spring and Mount

[dopie]

anyone in socal able to cut my front springs
and shave my rear mounts for me?
will gladly pay

 

[theMerchant]

you sure you want to cut the Eibachs ?

it has less coils then the H&R .... matbe people with them can chime in.... I know humbertocali has cut fronts I think.

good luck

 

[HumbertoCALI]

Yeah... mike are cut... here is a pic of it.... (Stock in the right and the lest is the cut Eibach spring)

 

[Psiclne]

Didnt you want to roll your fenders?

 

[dopie]

yea i want my fenders rolled also

 

[theMerchant]

ShanesG from g35driver did my fender roll, I gave him $80 (tip included).

---------- Post added at 10:08 PM ---------- Previous post was at 10:06 PM ----------

maybe he is willing to do the mods? I know other members over there will do work.

 

[dopie]

yea i contacted him couple days ago
and yep still $80 bucks

 

[theMerchant]

here is a DIY I found on g35driver concerning cutting rear spring upper mount

http://www.g35driver.com/forums/bra...ing-rear-springmount-aka-springmount-mod.html

 

[dopie]

would i need a camber kit for this?

 

[theMerchant]

IMO Im thinking ...for YOU , dont do this mod and dont cut the springs. for extra safety sake.

 

[dopie]

but i want my ride lowerd

can you cut the front mounts also?
cause ill just do the mount cuts not the springs
will that harm my springs still?
and would i need a camber kit?
cause i want about like 1 inch fender gap or less
if thats possible

 

[theMerchant]

you should get the rear camber/toe kits just in case.(most likely).
have a professional weld a modified strut for you and dont cut the spring. the rears just shave the mount and do a trick to the upper shock (details on the 'modified strut' thread).
thanks what Im planning on doing.

 

[StuLax18]

Is there even a front spring mount to cut?

 

[dopie]

Is there even a front spring mount to cut?

thats what im wondering also

 

[StuLax18]

I really don't think there is. Only option is to move the mount on the shock up so it sits lower.

 

[dopie]

in that cause with all the custom welding and such
dont got the funds for that
so i guess ill just keep on debating on if i should cut the fronts and cut the mounts or soemthing
cause the custom welding and stuff just a little to pricey from what i see