Chicago Meet
- Thread starter blueduck1105
- Start date
- Location
- Illinois
^ i think he was chased away with knowing we are all stalkerish when we FEEL someone is getting a mod done by Andy! and just happen to make our way over
Sent from my DROIDX
Sent from my DROIDX
- Location
- Illinois
^ Andy you have any ideas for some good scenic layouts for these fall pictures?
- Location
- Illinois
Pretty soon there will be a thread were you have to take a number or are able to set up your appointments for Handy Andy to install your mod!
You & I know it. We been trying to get the Invidia exhuast installed for the longest time. Tomorrow is the day.
Ed, if we have time on the day you're out by Joe
we can get those two outstanding mods out of the way.You & I know it. We been trying to get the Invidia exhuast installed for the longest time. Tomorrow is the day.
Ed, if we have time on the day you're out by Joe
sweet, where are you going? you are staying kakumei with new tips right?
i almost forgot i need to get the O2 bunge welded. aaron never got back to me...
- Location
- Illinois
Im buying Andy's old invidia and as you would assume...he is installing them!
Sent from my DROIDX
Sent from my DROIDX
ah, nice. good to live in chicagoland area, easy to mod!
Kakumei it is and I got a pair of resonated 13" long 4" 15 degree slant cut tips on their way. I know I will miss the Invidia's note when I hear one. Now my wife tells me she kinda miss the sound, it feels like it not my car anymore. Err, what?
Yeah, don't forget to get an O2 bung welded on. Probably mid Oct we'll have the A/R Gauge in hand.
BTW, I have the ScanXL scanner for over two weeks now. Ummm, it not a scanner scanner as we all know what a scanner looks like. Its just a fancy cable with an OBII connector at one end, a 1.5 x 1.5 inch square thingy in the middle and then an USB connector at the other end.
Oh sweet, so you did get resonated. I really love those tips, I had a dual tipped (quad exhaust look) on my QX4.
At least your kids are happy and the power is still there. You put so much time and money into the exhaust now, no going back=)
Yeah, the ScanXL looked like crap to me, made from 1980 (at least the picture on the website). But hey, it works and data logs, that's what counts. Would have been nice if it were cooler and did more, but then it would be really expensive. Maybe we should have just bought one on ebay from China/Taiwan for much cheaper=)
All you need to buy is the Consult II.
How much do we all owe you? I can help collect for you, I think it's Chris, me and you so three so far. Not sure if Andrew wants in.
I'm excited to have this tuned and see graphs. I love data like that, I bet you do too.
This is my LAST mod, but we've all heard that before...
At least your kids are happy and the power is still there. You put so much time and money into the exhaust now, no going back=)
Yeah, the ScanXL looked like crap to me, made from 1980 (at least the picture on the website). But hey, it works and data logs, that's what counts. Would have been nice if it were cooler and did more, but then it would be really expensive. Maybe we should have just bought one on ebay from China/Taiwan for much cheaper=)
All you need to buy is the Consult II.
How much do we all owe you? I can help collect for you, I think it's Chris, me and you so three so far. Not sure if Andrew wants in.
I'm excited to have this tuned and see graphs. I love data like that, I bet you do too.
This is my LAST mod, but we've all heard that before...
Kakumei it is and I got a pair of resonated 13" long 4" 15 degree slant cut tips on their way. I know I will miss the Invidia's note when I hear one. Now my wife tells me she kinda miss the sound, it feels like it not my car anymore. Err, what?
Yeah, don't forget to get an O2 bung welded on. Probably mid Oct we'll have the A/R Gauge in hand.
BTW, I have the ScanXL scanner for over two weeks now. Ummm, it not a scanner scanner as we all know what a scanner looks like. Its just a fancy cable with an OBII connector at one end, a 1.5 x 1.5 inch square thingy in the middle and then an USB connector at the other end.
Haha, I have to chime in too.
Andy apparaently can do everything on the FX except window tinting
Andy has a garage full of tools, ramps, jacks, etc... and his house is a nice location too -- which is why we typically end up there.
Also, we always call on Andy to help us on mods, and then 1 little mod turns into a few of us stalking each other and showing up at his house.
Andrew Aero, is also a lurker and knows the good places to eat=)
Good stuff to know. I'm pretty decent with cars myself. What do you normally charge for things?
photoshoot with FXes + 1 G35x LOL. Hey i've been part of boards for a while now, im used to the weird shit that goes on. :tongue (2):
Kakumei it is and I got a pair of resonated 13" long 4" 15 degree slant cut tips on their way. I know I will miss the Invidia's note when I hear one. Now my wife tells me she kinda miss the sound, it feels like it not my car anymore. Err, what?
Yeah, don't forget to get an O2 bung welded on. Probably mid Oct we'll have the A/R Gauge in hand.
BTW, I have the ScanXL scanner for over two weeks now. Ummm, it not a scanner scanner as we all know what a scanner looks like. Its just a fancy cable with an OBII connector at one end, a 1.5 x 1.5 inch square thingy in the middle and then an USB connector at the other end.
Nice, ive been using my orginal elmscan for most things and soon to be cipher.
- Location
- Illinois
I'm excited for the install tomorrow! I have been looking forward to this for awhile now!
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
Living in Chicago seems to be the worst influence for us FXers! The exhaust is going to be the last mod for me for a little while too! We need to be each others sponsors and attempt to prevent any impulse mods!
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
Living in Chicago seems to be the worst influence for us FXers! The exhaust is going to be the last mod for me for a little while too! We need to be each others sponsors and attempt to prevent any impulse mods!
nice, any plans to be downtown or in the loop? If so, I'll meet you for some grub if you can squeeze it in.
- Location
- Illinois
^ When is your "LAST" mod taking place?
You guys will all find out soon enough... Andy might post pictures Monday night.
Lance still wants me to do cams, headers, throttle body -- I'm not a baller shot caller like him yet. They call him L.Diddy out where he lives.
no plans to be in downtown area, only suburbs, but I will let you know if I end up swinging by....
- Location
- Illinois
having Handy Andy so accessible i wish i was a baller and could do everything i wanted