Can anyone hook me up with a wheel hub/bearing assembly?

[2010fx35]

Getting vibration again from my front right tire and a high squeel when going 60mph. Thinking its the wheel hub. Can anyone hook me up with one or know a good place for one?

2010 fx35 AWD

 

[cheste1]

There are tons on eBay - full assembly including new bearings for less than 200.

 

[2010fx35]

I saw on on ebay for 50$ priced down from 170ish. No clue if its oem or if its junk. Anyone have experience from ebay?

 

[cheste1]

Timken should be fine

 

[2010fx35]

Damn it i tried to do it on my own and nearly broke my socket wrench . I went out to buy a more solid wrench and no budge at all even with PB blaster. I tried adding a bar at the end but the damn thing was supporting my whole body weight. Sprayed it with more pb blaster hoping a over night soak will do something. Would it be bad if i went to a mechanic and asked them to loosen and put it back on?

 

[Themechanic]

You can have a mechanic shop loosen the axle nut & just snug it back on! You should be fine tightening it back up by yourself just tighten it really tight. But preferably rent or use a torque wrench. About 200 foot pounds should be good.
Check this guys post out, should help you out.
https://www.infinitiscene.com/search/1/?q=11012-HOW-TO-Replace-AWD-Front-Hub-Bearing-Assembly