- Location
- Atlanta, GA
- Car
- 2007 FX35
This is probably a really silly question. But as we all know, BC coilovers have camber plates on the front. To adjust the camber, do I need to loosen the two bolts on the bottom of the strut? When the shop installed them, they had to cut the old stabilizer endlink off because the bolt was frozen. So they put a new one onto the BC, all is fine. Somehow when they installed the BC, the camber on my passenger front is off slightly. Basically it's less cambered than the other one, not by a lot. So what's happening is that it is rubbing slightly. Obviously I will take it back to get aligned soon, but right now I'm playing with ride heights so I just want to adjust it myself and get it closer to spec.
Back to my question, what else do I need to loosen before adjusting the strut on the camber plate?
Back to my question, what else do I need to loosen before adjusting the strut on the camber plate?